Beckhoff PLC CX5130-0182

09/11/2020

How to ensure the stable operation of imported bearings

Generally speaking, pay attention to the following points from the perspective of use: 1. The bearing clearance should be appropriate. If it is too large, it will cause impact, and if it is too small, it will cause poor lubrication and may burn bushes.

08/31/2020

How to achieve zero consumption of compressed air for drainage

This article discusses the working principle of the compressed air zero-consumption automatic steam trap, and gives the most marketable accessory installation sample structure, and the actual energy-saving effect achieved in the actual application of the enterprise.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

07/19/2020

Refrigerant filling operation method of centrifugal chiller

The centrifugal chiller refrigeration compressor after completing the work procedure of filling the frozen lubricating oil, the next step should be the refrigerant filling operation, the method of operation is: (1) using copper pipes or PVC (polyvinyl chloride) pipes One end is connected with the filling valve at the lower part of the evaporator, and the other end is connected with the top joint of the refrigerant storage tank to ensure good sealing.

07/14/2020

Compressor operation requirements

Compressor operation requirements The first load operation of the compressor is carried out after the empty vehicle operation and purging are completed. The compressor should be operated according to the following requirements:

06/14/2020

What is That Noise? Here's Why Your AC Compressor is Making Noise

While the frequency for repairing or servicing your AC unit will depend on how big it is, how old it is, and how much you make it work, regular maintenance is good. When you hear an AC compressor noise, you should have someone who you can call to come an器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵

09/07/2020

Do you know how the model designation of the air compressor comes from

Four basic marking methods 　　 1. Use motor horsepower to express: This was still feasible when the air compressor technology was not developed in the early days. However, with the continuous development of technology, even if the same motor is used now,

08/20/2020

The general layout principle of the suction pipe in the cold storage

Recently, a small partner left a message asking about the general layout principles of the suction pipe in the cold storage. Today, the editor of okmarts.com will popularize this knowledge for everyone

09/07/2020

Selection and comparison of various dryers in air compressor systems

In the air compressor system, the selection of the dryer should be determined in accordance with the dry air consumption, the dryness requirements of the air equipment, the pressure, the type of air compressor... and other factors.

06/14/2020

Two methods of evacuating the refrigeration system

Vacuuming is an indispensable important process before charging refrigerant in the production or maintenance of refrigeration equipment. That is, the process of removing the non-condensable gas and moisture in the system pipeline by connecting the vacuum 器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘