Belimo Actuator NMQ24A
Type: Actuator
Brand: Belimo
Type: Actuator
Brand: Belimo
Type: Actuator
Brand: Belimo
Belimo Actuator LMQ24A-SR
Belimo Actuator EFU230-S2
Honeywell Actuator OM-P1-E
Honeywell Actuator ML7420A6009
Johnson Controls Actuator VA-7740-1003
AirTAC Air Cylinder SCD100X700
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Saginomiya Expansion Valve BHX-56070BMS
Siemens Contactor 3RT1456-6XJ46-0LA2
Iwaki Magnet Pump EHN-C31VHMR
Panasonic Servo Motor MDME104SCHM
SMC Solenoid Valve VT307V-4G1-01
01/11/2023
Hydraulic valves are used to control the flow direction or adjust the flow and pressure of liquids (oil, water, or air) in hydraulic systems.
09/24/2022
Piston pump is a kind of positive displacement pump. It relies on the reciprocating motion of the piston in the pump cylinder to make the working volume of the cylinder expand
10/31/2021
When the main circuit of the VFD is connected with the power line, in order to control the motor, it is necessary to connect the surrounding control circuit to the relevant terminals
08/16/2020
Screw chillers are widely used in industry and chemical industry. Screw chiller is just one type of screw refrigeration series. There are also medium and low temperature screw chillers, air-cooled screw chillers,
06/30/2020
Common faults and causes of compressors Common compressor failures are as follows: L. The compressor cannot start normally The power supply voltage is too low, the motor circuit is poorly connected, or the exhaust valve is leaking, resulting in too high pressure in the crankcase. The energy regulation mechanism has failed.
06/14/2020
Working principle of rotary vane compressor
07/17/2020
1. If the suction pressure and discharge pressure of the compressor are lower than the normal value, then you need to check to see if it is due to insufficient refrigerant charge.
09/05/2020
The test standards promulgated by the International Electrotechnical Commission IEC (hereinafter referred to as IEC) make it possible to evaluate the energy efficiency of motors.
06/29/2020
Causes of non-condensable gas in refrigeration system 1. Insufficient emptying of the refrigeration system before charging the refrigerant Before charging the refrigerator, the compressor cylinder in the refrigeration system, the condenser, the evaporator, and the piping of the system were filled with air. In order to eliminate these air before charging the refrigerant, the interior of the refrigeration system Vacuuming,
07/04/2022
Magnet pumps are seal-less centrifugal pumps that use a coaxial magnetic coupling to transmit torque to an impeller.