Bitzer Compressor GMU60154VLR232

03/22/2023

The Operation and Maintenance of Vacuum Pump

About 20 minute’s operation should be done in advance before vacuum pump starts to vacuumize assembling unit. And after oil temperature rises, open extraction valve of assembling unit to extract unit.

09/02/2020

The latest edition of compressed air purification terms (Chinese-English + paraphrase)

1 Scope 　　 is suitable for general purpose compressed air purification field, other purposes (such as medical treatment, breathing, etc.) and compressed gas purification terms can be implemented by reference.

09/05/2020

Not as simple as you think, there are three states of mechanical lubrication

Lubrication is a frequently encountered problem in equipment maintenance, but what exactly is lubrication? Speaking of lubrication, the scene in our minds may just apply oil or grease to the mechanical friction surface to reduce friction.

06/29/2020

How the compressor works

09/22/2020

Characteristics and trends of assembled centrifugal compressors

I. Introduction 　　 Assembled centrifugal compressor is also called assembling integral gear speed-increasing centrifugal compressor, and it has developed rapidly in the world in recent years.

06/22/2020

Working principle of steam compressor_steam compressor application

Working principle of steam compressor_steam compressor application Working principle of steam compressor After the steam is filtered by the filter, clean steam then enters the host cavity through the intake valve, and the volume of the cavity changes from large to small to compress the steam. The volume of the cavity is changed by the rotor rotating under the drive of the motor. <img src="{{media url=&quot;Working_principle_of_steam_compressor_steam_compressor_application.jpg&quot;}}" alt="" />

09/11/2023

Exploring the Different Types of Heat Pumps: A Comprehensive Guide

Heat pumps are an excellent source of heating and cooling for homes and businesses, offering energy efficiency, comfort, and convenience. They are available in a variety of types, each with their own advantages and disadvantages.

08/09/2020

How to debug the small cold storage during installation

1. Installation technology of expansion valve for small cold storage 　　 1. Check whether the temperature sensor is in good condition before installation; 　　2. The installation position of the expansion valve must be close to the evaporator, and the valve body should be installed vertically, not inclined or upside down;

08/05/2020

The difference between the three types of evaporators dry, flooded, and falling film evaporators

The refrigerant in the dry evaporator passes through the heat exchange tube, and the cold water runs outside the high-efficiency heat exchange tube. Such a heat exchanger has relatively low heat exchange efficiency,

02/10/2023

How to Replace a Blend Door Actuator?

Blend door actuators control the temperature and flow of air in the vehicle. If your vehicle only releases cold air, or you can't change the airflow