Bitzer Compressor GYD60120VBB4-2

08/26/2020

Mobile screw machine requirements for lubricating oil

The requirements of the mobile screw machine for lubricants are as follows 1. The volume of the mobile screw machine and the volume of the oil tank are small, the amount of lubricating oil is also small, and the oil temperature is higher during operation,Ÿﰨ2䀀湠皟VǜV
㠠ǝ㠠ǝ㠠ǝ類湠皟᳥皓ώႡЀ￾￿￾￿뇀Ⴔ湠皟
蘵皒㠠ǝ㋐ݗ痌律࡜

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

03/17/2023

Six Common Faults and Solutions of Water Pump

What you need to do first is to check the power supply: whether the joint is firmly connected, the switch contacts tightly, the fuse is blown, three-phase power supply is equal.

08/18/2023

Solar Assisted Heat Pump: Definition, Working Principle and Benefits

Solar assisted heat pumps are gaining popularity as an eco-friendly alternative to traditional heating systems.

07/16/2022

What is a Gear Pump

Gear pump is a rotary pump that transfers liquid or pressurizes it relying on the change and movement of the working volume formed between the pump cylinder and the meshing gear.

03/12/2024

Air Purifier: Components, and Principle of Dust Removal ＆ Purification

Air purifiers are a common household appliance in modern life. It can remove various air pollutants and effectively improve air cleanliness.

08/28/2020

Why should you use a real oil-free air compressor

There have been a lot of discussions and reports on the issue of oil in compressed air. Some people believe that for some processes and final products, the air used can contain a certain amount of oil,

06/14/2020

Characteristics of magnetic suspension refrigeration compressor

Characteristics of magnetic suspension refrigeration compressor 1. High operating efficiency: 2. No need for lubricating oil, maintenance cost is 50% lower than oil-containing compressor: 3. Ultra-light body design: 4. Super quiet operation process: ﰸ2䀀
ￜ皥

08/18/2020

How to solve the low cooling efficiency of low-temperature chillers

When the low-temperature chiller has a poor cooling effect, it means that the equipment is in high-efficiency operation, but there are very few cold sources, which cannot meet the actual needs of the company for a low-temperature environment.

08/06/2020

Have fun with the cooling water and condensate water system, start here!

1. Design steps of cooling water system<br></br> 　　 1. Installation of cooling water pump and cooling tower<br></br> 　　Each cooling tower should be equipped with at least one water pump. Generally, spare pumps should be considered for maintenance.