Okmarts Tecumseh Compressor TRK5480Y Tecumseh Compressor TRK5480Y, okmarts Online Average rating: 4.6, based on 89 reviews

Tecumseh Compressor TRK5450Y

Tecumseh Compressor TRK5512Y

Tecumseh Compressor TRK5480Y

88% of 100
Refrigerant: R-134a Displacement(cc): 18.1 Cooling Capacity(Btu/h): 7549
Availability: In stock
* Shipping calculated at checkout.

Packing and shipping

Packaging Regulation :

Wooden box

Delivery time :

7~14 days(About)

Conditions :

New and Genuine

Product Display

Tecumseh Compressor TRK5480Y, okmarts online

Product Description




 Voltage Range (50 Hz):


 Product Description:


 Voltage Range (60 Hz):




 Locked Rotor Amps (LRA):



 Brand new

 Rated Load Amps (RLA 50 Hz):



 Rotary Compressors

 Rated Load Amps (RLA 60 Hz):


 Application range:

 Refrigeration parts

 Max. Continuous Current (MCC in Amps):



 Stainless steel

 Motor Resistance (Ohm) - Main:




 Motor Resistance (Ohm) - Start:






Scope of application


refrigeration equipment, etc.

Product Media

Tecumseh Compressor TRK5480Y, okmarts online

Installation Process

refrigeration compressors in stock, Packing & Shipping, okmarts online

1. Check whether the refrigerating oil of the original compressor is too dirty. If the oil is too dirty, the system must be cleaned with nitrogen and the dry filter must be replaced.

2. Check whether the contacts of the compressor operation control AC contactor are stuck or have poor contact, causing the compressor to run out of phase. If the compressor is damaged in the coil winding, the AC contactor of the same model must be replaced.

3. Check and protect the circuit. The high and low pressure switch is in the closed state in the normal refrigerant compression state, the high pressure limit is less than or equal to 2.2Mpa, and the low pressure is more than or equal to 0.28Mpa.

4. Check whether the radiator is too dirty and must be cleaned.

5. Check whether the original equipment has refrigerant pressure, and repair it if the refrigerant is leaking.

refrigeration compressors in stock, Packing & Shipping, okmarts online

1. Disconnect the power supply.

2. Disassemble the compressor and check its old compressor.

3. Nitrogen cleaning system, steps, disassemble the filter and blow in nitrogen from the inlet of the radiator, discharge from the outlet of the radiator, then blow in from the inlet of the filter, release from the return pipe of the compressor, and repeat cleaning several times.

4. Install the new compressor and weld the new filter.

5. Use nitrogen to pressure, 2.0Mpa pressure for leak detection for 30 minutes.

6. Circuit check and replace damaged parts, check power supply and control circuit.

7. Clean the radiator.

8. Vent the nitrogen and evacuate for 30 minutes.

9. Add the same type of refrigerant

10. Power-on debugging, check the compressor current and voltage, the normal pressure of the refrigerant, high pressure 1.7Mpa, low pressure 0.45Mpa, the refrigerant charge is expected to be 0.7kg/hp (10-30hp).

Packing & Shipping

refrigeration compressors in stock, Packing & Shipping, okmarts online

Q: What means of transportation?

A: It can be shipped by air to the nearest international airport or by courier like DHL, TNT to your address; if it's not urgently required, they can also be shipped by sea to the nearest sea port.

Q: How long is your delivery time?

A: Usually, if it is in stock, it will take 5 to 10 days. Or, if there is no stock, it is 15-20 days, depending on the quantity.

Tecumseh Compressor logo, okmarts online

Tecumseh Products Company is an American manufacturer of hermetic compressors for air conditioning and refrigeration products. Tecumseh Products Company has subsidiaries that sell internally and externally to Tecumseh.

Shipping cost is not included

Type: Rotary Compressors
Application: HBP/AC - Air Conditioning
Voltage/Frequency: 460VAC-3PH 60Hz 380-420VAC-3PH 50Hz
Evaporating Temp. Range: -15 to 15 Celsius degrees
Motor Torque: Low Start Torque (LST)
Compressor Cooling: Fan
Weight: 11
Weight Unit of Measure: KG
Displacement (cc): 18.1
Oil Type: Polyvinylether
Viscosity (cSt): 68
Oil Charge (cc): 414
Voltage Range (50 Hz): 342-462
Voltage Range (60 Hz): 396-506
Locked Rotor Amps (LRA): 16
Rated Load Amps (RLA 50 Hz): 2
Rated Load Amps (RLA 60 Hz): 2
Max. Continuous Current (MCC in Amps): 3.8
Motor Resistance (Ohm) - Main: 13.5
Motor Resistance (Ohm) - Start: 13.5
MotorType: 3PH
Overload Type: N/A
Relay Type: N/A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account