Block Transformer VB 3,2/1/9

06/29/2020

Compression ratio of American Copeland compressor

08/12/2020

Four steps in the use of parallel compressors in cold storage

The use of parallel compressors focuses on four issues, as follows: 　　①Keep the oil level 　　② Countermeasures for liquid flood back 　　③Protection device and accessory parts device 　　④Confirmation of piping stress

08/19/2020

Tips for quick air conditioning

1: The press does not start, there is no problem with the temperature setting, but there is no response after power on<br></br> 　　 The compressor does not turn, the fan turns, you must first look at the capacitor

07/01/2020

Three major causes of compressor cracks in winter

Three major causes of compressor cracks in winter When using the compressor in winter, we may encounter some problems, such as cracks in the compressor body. There are many ways to cause cracks in the compressor. After summing up, the specifics can be summarized as the following three points:

08/16/2020

Parameters for judging whether industrial chillers are in good condition

Industrial chillers will have certain parameters for users to refer to during operation, which can be displayed through relevant instruments. It is possible to control and observe the various parameters of the industrial chiller during operation,

01/19/2022

Transmitter Common Faults & Diagnosis Methods

Transmitter faults mainly include complete fault, bias fault, shifting fault, and precision degradation fault. This is shown in figure 2.

08/06/2020

Material selection specification in cold storage design

In addition to heat insulation and moisture-proof materials, cold storage design materials include bricks, stones, cement, concrete, mortar, steel bars, and wood.

09/10/2020

Analysis of closed operation process of screw air compressor

Regarding how the screw air compressor works to convert air into energy to meet the production needs of enterprises, I believe that there are not many curious friends who know it.

08/20/2020

How to judge the fault based on the indicator light of the ice machine

1. The power indicator light keeps flashing quickly and the machine does not work: The cause of the failure: the water temperature probe is open. Repair method: Open the rear cover, open the cover of the electric control box above the compressor, find a three-core connector, check if there is any dropout or poor contact, then reconnect it.

08/08/2020

Reasons for condensation at the bottom of the condenser

Reasons for condensation at the bottom of the condenser 1. It is abnormal if condensation occurs at the bottom of the condenser when the unit is running. It may be the reason for the low amount of refrigerant.