Bristol Compressor H20J443DBDX

09/09/2020

Poor compressed air quality has a huge impact on the SMT industry

As the second largest power source after electricity, air has been recognized by the business community. When considering the configuration of SMT production line, equipment selection, and subsequent installation and use,

08/14/2020

Analysis of common problems in the design of refrigerant multi-connected air conditioning system

1. Applicable area and scope of refrigerant multi-connection system 　　 Refrigerant multi-connection system is suitable for areas: The refrigerant multi-connection is suitable for hot summer and cold winter areas, hot summer and warm winter areas, and some cold areas.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

07/18/2020

Classification and main performance of HVAC chillers

Commonly used chillers are divided into piston type, screw type, centrifugal type, and vortex type chiller according to the type of refrigeration compressor used. Their evaporators and condensers generally use shell and tube heat exchangers, the throttling device uses thermal expansion valves, the refrigerant is freon

07/07/2020

Behind the tearing of enterprises the central air conditioning market is facing a crisis

Behind the tearing of enterprises the central air conditioning market is facing a crisisIn fact, in the slump of the home appliance market in the past few years, the central air-conditioning market has been "another vigorous scene."

07/23/2020

9 usage details that affect the life of air conditioners

1. Clean the air filter frequently. Usually clean once every 2-3 weeks. The steps are: remove the panel; pull out the air filter; clean the air filter. Rinse the air filter under the tap. Since the filter is made of plastic frame and polyester silk, it should not be cleaned with hot water above 40℃ to prevent shrinkage and deformation.

07/01/2020

How to check the compressor body for cracks

How to check the compressor body for cracks In winter, it is relatively common for compressors to crack. I believe many people have ideas to prevent this kind of problem. In fact, it is not impossible, as long as we conduct a detailed inspection of the compressor body during normal maintenance, this problem can be avoided.

09/08/2020

Types and functions of adsorbents for drying machines

The working principle of the suction dryer (also known as the adsorption dryer) is to reduce the moisture content in the compressed air by using the characteristics of the adsorbent to absorb moisture. Generally speaking, the pressure dew point of the outlet air of the suction dryer reaches -20℃~-70℃ .

09/11/2020

Selection skills of single screw pump

The professional senior engineer of the air compressor construction machinery leasing company told everyone that the specification of the single screw pump is determined by the nature, flow and pressure of the liquid to be transported, and the speed of the pump is determined by the viscosity and corrosiveness of the liquid. The selection of parameters can ensure the reliable operation of the pump.

08/17/2020

Causes and treatment of cracks at the inlet of the cooler

The crack at the inlet and outlet of the cooler is a kind of brittle crack, which is generally manifested as a crack at the tip of the toothed plate, and then cracks along the intergranular.