Bristol Compressor H22J383DBLK

08/20/2020

What is the difference between chillers and general water cooling equipment

Today, with the rapid development of modern industrial technology, in order to improve production efficiency, improve product quality, and reduce production costs, the requirements

07/23/2020

Analysis of common failure causes of hermetic refrigeration compressors

1. How to identify the 3 terminals on the casing of a hermetic compressor?<br></br> The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.<br></br>

06/21/2020

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.

12/29/2021

Where is Servo Motor and Servo Drive Used?

With the development of information, communication and automation technology, a wide variety of automatic control devices have been used in industry production and daily life of modern world.

07/20/2020

How to eliminate the difficult problems of the salt spray test chamber

Many people will blame the poor quality of the salt spray test box in actual use. However, the relevant departments have used statistical data to tell us that more than 50% of these problems are caused by operation. Only 5% is the quality problem of the salt spray test box itself.

02/01/2023

What is Gear Ratio?

Gear ratio, i.e., the reduction ratio of the reducer, refers to the ratio of the instantaneous input speed to the output speed in the reduction mechanism, and is represented by the symbol "i".

07/31/2020

How to fix Samsung air conditioner failure

In recent years, Samsung has continued to develop electronics very well. Samsung air conditioners are also outstanding among air conditioner brands, and they are an air conditioner brand that many consumers will freely choose

05/10/2022

Common Faults and Solutions of Solenoid Valve?

Detection method: First, measure its make-break with a multimeter. If the resistance value approaches zero or infinity, it indicates that the coil is short circuited or open circuited.

05/12/2022

6 Advantages of PLC?

Because PLC mostly adopts single-chip microcomputer, it has high integration. And it has corresponding protection circuit and self diagnosis function, which improves the reliability of the system.

06/29/2020

Compression ratio of American Copeland compressor