Bristol Compressor H23B32QABC

06/29/2020

Compression ratio of American Copeland compressor

08/19/2020

How does the central air-conditioning project adjust and improve the wind power during operation

The central air-conditioning project is an overall system project, which contains many specifications such as technology, equipment, design, management, etc. A successful central

06/14/2020

The reasons for the high temperature of the compressor discharge are

The reasons for the high temperature of the compressor discharge are (1) The clearance in the compressor cylinder is too large; (2) The suction and exhaust valves and piston ring of the compressor are damaged; (3) The compressor safety bypass valve器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥

10/23/2025

Why Refrigeration System Clogged

The blockages in the refrigeration system include ice, dust, oil and welding blockage, etc.

08/12/2020

Operation method of air discharge in refrigeration system of industrial chiller

Air is a non-condensable gas, which means that air will not condense into liquid at ordinary low temperatures. If air is mixed into the refrigeration system of an industrial chiller, it will affect the heat dissipation of the condenser and increase the co¨ﰨ2䀀湠疨V

06/21/2020

The principle of centrifugal compressor structure

The principle of centrifugal compressor structure Structure principle of centrifugal compressor <img src="{{media url=&quot;The_principle_of_centrifugal_compressor_structure.jpg&quot;}}" alt="" /> 　　 Centrifugal compressor is composed of rotor, stator and bearing. The impeller and other parts are sleeved on the main shaft to form a rotor. The rotor is supported on the bearing and driven by the power machine to rotate at high speed.

08/17/2020

The main difference between the appearance of the evaporator and the condenser

Both the evaporator and the condenser actually have their own advantages, but the principle is actually figured out, so what is the main difference in appearance between the two, I will take you to understand.

06/14/2020

Chinese air-conditioning compressor industry development and market data statistical investigation

Chinese air-conditioning compressor industry development and market data statistical investigation

06/21/2020

Common failure and analysis of centrifugal air compressor

Common failure and analysis of centrifugal air compressor 1. Abnormal vibration and noise: ① Misalignment ② The compressor rotor is unbalanced ③ The impeller is damaged ④ The bearing is abnormal ⑤ The coupling is faulty or unbalanced ⑥ The sealing ring is bad ⑦ The oil pressure and oil temperature are abnormal ⑧ There is dirt in the oil Clean, wear out the bearing ⑨ Surge ⑩ The stress of the gas pipeline is transmitted to the casing, which causes misalignment ⑪ There is a machine working near the compressor<img src="{{media url=&quot;Common_failure_and_analysis_of_centrifugal_air_compressor.jpg&quot;}}" alt="" />

08/14/2020

Effective means to reduce the resistance of condenser heat transfer system

To ensure that the condenser has a higher heat transfer coefficient, it is necessary to reduce the resistance in the system. There are three ways to achieve this goal.