Bristol Compressor H79B35UABCB

03/03/2021

Control mode of servo motor

Torque control: the torque control mode is to set the external output torque of the motor shaft through the input of external analog quantity or the assignment of direct address. For example, if 10V corresponds to 5nm, when the external analog quantity is set to 5V, the output of the motor shaft is 2.5nm: if the load of the motor shaft is lower than 2.5nm, the motor will rotate forward, and when the external load is equal to 2.5nm

06/29/2020

What is the cause of compressor pipeline vibration

07/31/2020

Is it normal to see smoke from the outdoor unit during air conditioning heating in winter

In winter, when using air-conditioning for heating, the effect is either reduced or there is no hot air. I always feel that the heating effect is very poor! Many air conditioners are surrounded by snow. Can they be effective

05/29/2023

How to Tell If AC Compressor is Bad

Air conditioning systems have several components that assist in the cooling of the air. These components are the compressor, condenser and evaporator.

09/08/2020

Brief introduction of compressed air purification equipment applicable industries

Compressed air is the second largest power source after electricity. It is also a process gas source with multiple uses. Its application range covers petroleum, chemical industry, metallurgy, electric power, machinery, light industry, textiles, automobile manufacturing, electronics, and food. ,

03/17/2021

Several common faults in the spindle drive system of CNC machine tools and how to repair it?

When the vertical machining center supporting FANUC6 system is working, the machine tool vibrated severely, and the AC spindle drive displayed AL-04 alarm. During the vertical machining center supporting FANUC6 system is working, the machine tool vibrates severely, and the AC spindle drive displays AL-04 alarm.

06/14/2020

11 common problems in refrigeration compressors, do you know these

11 common problems in refrigeration compressors, do you know these 1.Why control the impurity content and moisture content of the compressor and air conditioning system?

08/11/2020

Don't worry if the refrigeration unit fails, look here!

Many of the failures of the refrigeration unit are compressor problems. According to the different problems of the refrigeration unit failure, we analyze and decide how to solve the failure of the refrigeration unit reasonably.

09/17/2022

Classifications of Air Cylinders

The air cylinder, also known as the pneumatic cylinder, is a cylindrical metal part that makes the piston to perform a reciprocating motion.

11/13/2024

Heating, ventilation and air conditioning systems (HVAC) working schematic and construction animation demonstration

Air-conditioning animation, wind system and water system can be understood at a glance! First, let's take a few professional and traditional central air conditioning systems 1.Water cooling unit +AHU/FCU