CHINT Transformer JBK3-800

08/05/2020

Refrigeration oil replacement points of screw refrigeration compressors for cold storage equipment

1. The role of lubricating oil:<br></br> 　　1) A dynamic seal is formed between the screw and the compression chamber and the male and female screws to reduce the leakage of refrigerant from the high pressure side to the low pressure side during the compression process.<br></br>

08/18/2020

How to solve the problem of too high compression ratio of chiller

In the process of using industrial chillers, various problems will inevitably occur. Due to the structure of the industrial chiller, once the compression ratio of the compressor is too high, it will affect the working efficiency of the industrial chiller.

09/05/2020

The technical core that affects the development and use of cold dryers

The application of refrigeration dryers is very extensive. This article is to describe the core technology, important fields and development directions of refrigeration dryers to describe the core of the technology that affects the development and use of refrigeration dryers.

11/08/2024

R410a VS R134a: Comparison of Commonly Used Refrigerants in Data Centers

At present, data centers mainly use two types of refrigerants. One is R410a, which is mainly used in small or medium-sized data centers with air conditioning cooling capacity of 300-400 KW.

08/05/2020

Analysis Application of energy meter in air conditioning measurement

Central air-conditioning household metering technology is more and more commonly used in public buildings with centralized cooling. On the one hand, users can encourage users to use air-conditioning rationally,

08/26/2020

Comprehensive knowledge of air compressor oil

1. How is air compressor oil classified? Answer: According to the structure of the compressor, air compressor oil is divided into two types:

07/16/2020

Limitations of motor protectors

The main purpose of motor protection is to protect the motor from burning, and the function of the protector is very limited, which is obviously an impossible task. In practical applications, there are many reasons that can cause the motor to burn down, which can be roughly divided into the following categories: motor overload caused by various

02/10/2023

How to Replace a Blend Door Actuator?

Blend door actuators control the temperature and flow of air in the vehicle. If your vehicle only releases cold air, or you can't change the airflow

09/11/2020

Bearing according to the type of rolling element

Bearings are classified according to the types of rolling elements: 1. Ball bearing: the rolling elements are balls 2. Roller bearing: the rolling element is roller

06/29/2020

Suggestions for troubleshooting of compressor with liquid start