CKD Switch APE-8T

08/20/2020

Installation and placement conditions of cooling tower of thermal shock tester

Let's learn about the installation and placement conditions of the cooling tower of the thermal shock tester with the editor of okmarts.com! 1. The ground is flat and well ventilated;

09/07/2020

Do you know how the model designation of the air compressor comes from

Four basic marking methods 　　 1. Use motor horsepower to express: This was still feasible when the air compressor technology was not developed in the early days. However, with the continuous development of technology, even if the same motor is used now,

08/21/2025

Summary of the key issues of the servo motor drive

According to the current of the motor, use a driver that is greater than or equal to this current. If low vibration or high precision is required, a subdivision drive can be used. For high-torque motors, use high-voltage drivers as much as possible to obtain good high-speed performance.

09/06/2020

Basic knowledge of PID regulation and PID

What is PID regulation and the basic knowledge of PID At present, the level of industrial automation has become an important indicator of the modernization level of various industries.

09/07/2020

Eight advantages of using frequency converter in air compressor

In recent years, China’s call for energy conservation and emission reduction has become increasingly louder, and there has been an increasing demand for energy-saving equipment.

07/14/2020

The cause of insufficient compressor displacement

The cause of insufficient compressor displacement Insufficient exhaust volume is one of the faults that compressors are prone to occur. Its appearance is mainly caused by the following reasons: 1. The failure of the intake filter: clogged fouling,

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

06/14/2020

About the six advantages of the fresh air system and the four details that need attention

About the six advantages of the fresh air system and the four details that need attention With the continuous improvement of living standards, coupled with whether the haze weather is invading, the fresh air system is gradually becoming a necessary choicﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00븹먱댁珵理뛐珵Љ
䕄ྦ￿￿뤂ᐱ變뚜

08/15/2020

How much is the temperature control of the industrial chiller How to set it up

Industrial chillers are commonly used refrigeration equipment in the industrial refrigeration industry, with a wide range of types, complete models, affordable prices, and can be customized for a wide range of applications.

09/06/2020

Spindle design of machining center and high-speed precision CNC milling machine

High-speed machining can not only double the production efficiency, but also further improve the machining accuracy and surface quality of parts, and solve some of the high-efficiency machining problems of some special materials that are difficult to solve in conventional machining. Therefore, high-speed machining has caused a high degree in the world. Pay attention.