CONVUM Switch MPS-V2R-G

08/25/2020

The cleaning and maintenance of the chiller is of great care in autumn and winter!

How to ensure the normal operation of our chiller equipment in the cold winter? Now I will explain to you the relevant precautions and maintenance methods of the chiller when the ambient temperature is harsh in winter.

08/05/2020

In the hot summer, be wary of the 5+X hidden dangers of cold storage

With Chinese economic and social development and the continuous improvement of people’s living standards, the cold chain logistics industry has obtained unprecedented development opportunities.

06/14/2020

Correct treatment method after refrigeration compressor burned out

I. Introduction: 　　If the compressor burns down or mechanical failure or wear has caused the inevitable pollution of the refrigerant system, the situation is as follows:

07/31/2020

How to use refrigerant to empty the air conditioner after installation

Air, moisture and impurities contained in the air will cause pressure increase, current increase, noise increase, and power consumption increase in the air conditioner system, which will reduce the cooling (heat) capacity, and may also cause ice blockage and dirty blockage.

06/30/2020

You should know the normal working condition of the compressor in the cold storage

You should know the normal working condition of the compressor in the cold storage 1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature.

09/13/2022

Differences between a Sensor and an Actuator

A sensor is a detection device that can sense the measured information, and can transform the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission

09/11/2020

Bearing according to the number of rows of rolling elements

According to the number of rows of rolling elements, bearings are divided into:<br></br> 1. Single row bearing: bearing with one row of rolling elements;<br></br> 2. Double row bearings: bearings with two rows of rolling elements;<br></br> 3. Multi-row bearings: bearings with more than two rows of rolling elements and bearing loads in the same direction.<br></br>

08/16/2020

Reasons for the slow temperature drop of the refrigerator

The refrigeration performance of the refrigerator is a major factor in evaluating the quality of the refrigerator, so the temperature of the refrigerator is very important.

07/05/2020

Full analysis of high-temperature burn-down failure of scroll compressor

Full analysis of high-temperature burn-down failure of scroll compressor Scroll compressor overheating at high temperature for a long time will not only reduce the insulation performance and reliability of the motor, shorten the life of the motor, but also reduce the lubricating ability of the lubricating oil, and even cause carbonization and acid hydrolysis of the lubricating oil.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms