Copeland Compressor 3DS3A100E-TFD

07/20/2020

What are the specific operation methods for the maintenance of cold storage screw compressors?

　 Before the cold storage screw compressor must be overhauled, if possible, unload the slide valve to the "0" position, shut down normally, and cut off the power supply. The pipeline connected to the compressor should be cut off and the refrigerant and lubricating oil in the compressor should be discharged before the compressor can be disassembled.

07/27/2020

Cause analysis of common failures of compressors with heat transfer oil heating system

Cause analysis of common failures of compressors with heat transfer oil heating system<br></br>

06/14/2020

Analysis and solution of the three reasons for the high temperature of the exhaust of the compressor dryer

Analysis and solution of the three reasons for the high temperature of the exhaust of the compressor dryer

08/08/2025

Why Refrigeration Compressor Oil Deteriorates & How to Add Oil

The lubricating oil used in a refrigeration compressor can lubricate the friction surface, reduce the friction work, friction heat and avoid wear of the compressor motor.

08/02/2020

How to quickly calculate the cost of cold storage

Factors that determine the price of cold storage<br></br> 　　 cold storage unit: (cold storage unit size, cold storage unit brand, cold storage unit origin, cold storage unit type).

08/13/2020

Lubrication method of screw chiller internal components

If the compressor lubrication system of the screw chiller is better, it can reduce the friction, friction heat and wear of the parts of the compressor, better improve the mechanical efficiency of the compressor

09/04/2020

Oil filter of air compressor oil circuit component function description

The oil filter is a paper filter whose function is to remove impurities in the oil, such as metal particles, oil deterioration, etc., with a filtration accuracy of 5-10μ, and it has a perfect protective effect on the bearing and rotor.

08/08/2020

Reasons for condensation at the bottom of the condenser

Reasons for condensation at the bottom of the condenser 1. It is abnormal if condensation occurs at the bottom of the condenser when the unit is running. It may be the reason for the low amount of refrigerant.

08/21/2020

Treatment method of ammonia leakage accident in ammonia refrigeration compressor

During the operation of the cold storage, the maintenance and maintenance of the ammonia refrigeration system are not in place, which will cause some failures in the ammonia refrigeration system.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms