Copeland Compressor KAT4-0100-CAA-235

08/24/2020

Various problems that may occur in central air conditioning

Many users will encounter various problems in the process of using central air-conditioning, such as noise, uncooled heat, power consumption, etc. Among them, nothing is more serious than air-conditioning leakage,

09/01/2020

Application of compressed air in sandblasting equipment

For a long time, the compressed air produced by the air compressor unit is not only widely used in machine tool equipment in the machining industry, but also widely used in the metal surface processing industry.

06/27/2020

The sign of the normal operation of the refrigeration unit

The sign of the normal operation of the refrigeration unit 1. There is no knocking sound in the piston refrigeration compressor, the compressor is operating normally, the expansion valve opening is adjusted properly, and there is only compressor suction and exhaust sound during operation, and no knocking or other abnormal sounds are produced.

08/19/2020

Which air conditioner, floor heating, or radiator consumes the most electricity

At present, the household heating methods of the residents in the north and south of our country are becoming more and more diversified. Radiators, air conditioners, and floor heating are the three most common household heating methods.

01/24/2025

Application of HMI in PLC Based Industrial Control System

Programmable logic controller (PLC) plays an important role in factory automation (FA). The continuous development of technology has greatly promoted the improvement of control function and control level of the control system based on PLC

06/14/2020

Common terms of screw air compressor

Common terms of screw air compressor

04/04/2025

Solenoid Valves on KOBELCO Excavators: Locations, Functions, Error Codes and Troubleshooting Methods

When KOBELCO excavator displays error codes starting with D and E, such as D012 and E013, they are a solenoid valve problem.

08/15/2020

Cold storage operation maintenance and management methods

1.Booting and preparation before booting Before starting up, check whether the valves of the unit are in normal starting state, check whether the cooling water source is sufficient, and set the temperature according to the requirements after the power is turned on.

08/12/2020

Matters needing attention when choosing evaporator for chiller

The evaporator is one of the four major components of the refrigeration system, and it is the ultimate manifestation of the cooling effect and efficiency. The evaporator is generally designed and equipped by the chiller manufacturer

06/29/2020

Several causes of compressor burning