Cutler Hammer Contactor C825KN10

08/08/2020

The role of these parts in cold storage construction

Speaking of cold storage, we must all know that in the field of food in our daily life, it brings us not only convenience in life, but also health and safety. Everyone knows that any piece of equipment will need a lot of large and small parts,

08/19/2020

Three maintenance and inspection methods for air-conditioning refrigeration compressors

In order to ensure the normal operation of the compressor and prolong its service life, in addition to regular maintenance and inspection, daily maintenance and inspection are very important.

07/10/2020

Working principle diagram and precautions of screw air compressor

Working principle diagram and precautions of screw air compressor Working principle diagram of twin screw air compressor 1. Basic structure and working principle

08/20/2020

Common problems that should be paid attention to in the selection of cold storage forklifts

With the development of the Chinese economy and the increase in the urban population, the consumption level of the people continues to increase, and the demand for refrigerated food in the society is also showing explosive growth.

08/17/2020

Structural requirements of modular air conditioning units

1. When the windward velocity of the cooling coil exceeds 2.5m/s, a water baffle shall be set. 　　2, the spray section should have an observation window, a water baffle and a water filter device.

12/05/2022

Materials for Linear Guideways

Linear guideways are widely used in transmission system and have many characteristics such as high hardness, high accuracy, etc. These are largely attributed to the advanced material they use.

06/29/2020

How the compressor works

01/04/2024

3D Printer: Working Principle, Function of Components and Solutions to Overheating Problem

3D printing technology emerged in the mid-1990s. Its basic working principle is similar to regular printing. The printer contains powdered materials such as metal or plastic, which can be bonded together.

08/18/2020

Installation method of ventilation and air conditioning system

1.Installation of ventilation ducts<br></br> 1) The duct can be manufactured on site or prefabricated in the factory. The duct manufacturing methods are divided into bite connection, rivet connection, and welding.

08/25/2020

Mitsubishi inverter air conditioner basic principle training

1. The difference between inverter air conditioner and fixed frequency air conditioner <br></br> 　　 1. Different compressors