Danfoss Compressor HKK95AA

08/15/2020

Installation problems of prefabricated cold storage fans

1. Whether the installation of the prefabricated cold storage fan is appropriate will directly affect the performance of the entire system and the cooling and heat preservation performance of the prefabricated cold storage.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/16/2020

Quality Reliability Test and Improvement of the Main Body of Filter Element

Abstract: Combining with the actual situation of the oil production site, through a comprehensive analysis of the manifestations of filter element failure, the filter element material, main tube wall thickness, and water hole density are used as the three main reliability factors that affect the life of the filter element on-site, and the pole is reasonably determined.

08/28/2020

What is the relationship between the nitrogen generator and summer ice beer

With the coming of summer and the temperature gradually rising, cold beer will become the best seller of this season. In the hot summer, crayfish with cold beer, it is cozy! And what do you know about beer production?

08/08/2020

The design points of capillary refrigeration system

The design points of capillary refrigeration system 1. On the high-pressure side of the refrigeration system, do not install a liquid reservoir, and try to reduce its effective volume on the premise that the condenser can contain all the refrigerant.

08/20/2020

Three maintenance and inspection methods for air-conditioning refrigeration compressors

In order to ensure the normal operation of the compressor and prolong its service life, in addition to regular maintenance and inspection, daily maintenance and inspection are very important.

09/01/2020

The most complete version｜Basic theoretical knowledge of compressed air (2)

Six, compression and compression ratio 　　1, compression 　　 Adiabatic compression is a compression process in which gas heat is not significantly transferred or transferred during the compression process.

06/14/2020

The role of lubricating oil

The role of lubricating oil 1) A dynamic seal is formed between the screw and the compression chamber and the male and female screws to reduce the leakage of refrigerant from the high-pressure side to the low-pressure side during the compression process.

09/03/2020

The customer says the price is high, what should the air compressor seller do

After quoting customers, we often encounter such a problem, "Your price is too high". Strictly speaking, it is not a rejection of the question "your price is too high" raised by the customer. This is actually a positive signal.

05/15/2024

Purge Valve: Everything You Need to Know

In the intricate ecosystem of modern automobiles, where every component plays a vital role in ensuring smooth functioning, the purge valve stands out as a crucial part of the emissions control system.