Danfoss Compressor HLJ072T5LC7

08/12/2020

How to increase the displacement of the compressor and the common problems of the compressor

1. How to increase the displacement of the compressor?<br></br> 　　Answer: Increasing the compressor's displacement (air delivery) means increasing the output coefficient. The following methods are usually used:

08/14/2020

Common problems and solutions of liquid refrigerants in refrigeration systems

1. Migration of liquid refrigerant<br></br> 　　 refrigerant migration refers to the accumulation of liquid refrigerant in the compressor crankcase when the compressor is stopped.

08/05/2020

The difference between the three types of evaporators dry, flooded, and falling film evaporators

The refrigerant in the dry evaporator passes through the heat exchange tube, and the cold water runs outside the high-efficiency heat exchange tube. Such a heat exchanger has relatively low heat exchange efficiency,

08/15/2020

Energy saving ways and methods for cold storage

1. Optimize energy saving from a design perspective 　　 (1) Reasonably determine the control temperature of the design cold storage, and reduce the temperature difference between the return air.

09/08/2020

Selection of adsorbent for adsorption dryer

The choice of adsorbent is not only a cost issue, but first of all, it is related to the efficiency of the adsorption dryer. In most cases, high-priced molecular sieves should not be the first choice adsorbent-although it has very good low water pressure adsorption characteristics.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/24/2022

Piston Pump: Working Principle, Types, and Features

Piston pump is a kind of positive displacement pump. It relies on the reciprocating motion of the piston in the pump cylinder to make the working volume of the cylinder expand

03/17/2021

Several common faults in the spindle drive system of CNC machine tools and how to repair it?

When the vertical machining center supporting FANUC6 system is working, the machine tool vibrated severely, and the AC spindle drive displayed AL-04 alarm. During the vertical machining center supporting FANUC6 system is working, the machine tool vibrates severely, and the AC spindle drive displays AL-04 alarm.

09/04/2025

AC Compressor Bearing - Working Principle & Troubleshooting

Bearings play an irreplaceable role in mechanical design. They involve very wide applications.

08/09/2020

How to judge the new and old refrigeration compressors

After we buy the chiller, how to judge the old and new problems of the compressor? This requires the accumulation of professional knowledge. Therefore, in view of this, users should master some knowledge about industrial chillers.