Danfoss Compressor MT64HM9NVE

08/19/2020

Application of large temperature difference cooling water system in industrial cooling system

In the industrial cooling system, in order to meet the process requirements, small flow materials need to be cooled with a large temperature difference (for example, a certain juice beverage needs to cool the material from 30°C to 5°C

07/01/2020

How to adjust the capacity of refrigeration compressor

How to adjust the capacity of refrigeration compressor The capacity of the compressor is determined according to the maximum production of BOG in the storage tank. After the compressor is selected, its capacity is constant. If the amount of inhaled air is greater than the amount of BOG produced in the tank, the tank pressure will drop.

07/18/2020

Exhaust gas of refrigeration compressor is overheated. Are these reasons caused

Compressor: It is a complex machine running at high speed. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, pistons, etc. is the basic requirement for maintaining the normal operation of the machine. For this reason, compressor manufacturers require the use of specified grades of lubricating oil, and require regular inspection of the lubricating oil level and color

06/22/2020

Working principle of steam compressor_steam compressor application

Working principle of steam compressor_steam compressor application Working principle of steam compressor After the steam is filtered by the filter, clean steam then enters the host cavity through the intake valve, and the volume of the cavity changes from large to small to compress the steam. The volume of the cavity is changed by the rotor rotating under the drive of the motor. <img src="{{media url=&quot;Working_principle_of_steam_compressor_steam_compressor_application.jpg&quot;}}" alt="" />

06/14/2020

The refrigeration master analyzes the phenomenon and cause of compressor liquid blow, you are worth reading!

The refrigeration master analyzes the phenomenon and cause of compressor liquid blow, you are worth reading! The phenomenon that the refrigerant or lubricating oil damages the intake valve piece when the gas is sucked into the compressor cylinder, and do器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧Ѧ識�僬㣢ᐲ臆S㥲ᐲ

09/14/2020

Smart vortex flowmeter

1. Function introduction: On-site LCD meter display, real-time temperature, real-time pressure, instantaneous flow, flow accumulation, temperature and pressure compensation function, when measuring gas and steam, check the meter according to the measured temperature and pressure to ensure compensation The flow rate is not affected by temperature and pressure changes,

07/29/2020

Refrigerant filling

After the leak test of the refrigeration system is completed, it should be filled with refrigerant. However, the Freon refrigeration system must be vacuum dried before being filled with refrigerant. When the drying is not complete, the refrigerant cannot be filled.

08/20/2020

Placement of the thermostatic valve bulb

The bulb should be as close as possible to the outlet of the evaporator and placed in close contact with the outlet pipe. In the part of the pipe section where the temperature bulb is in contact with the pipe,

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

06/14/2020

Summary and development of scroll refrigeration compressor technology

Summary and development of scroll refrigeration compressor technology The scroll refrigeration compressor is a new type of refrigeration compressor that has only been practical for more than ten years. It is currently the most advanced compressor with a ﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00븹먱댁珵理뛐珵Љ
䕄ྦ￿￿뤂ᐱ變뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់變ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱