Danfoss Compressor SH161A9ABW

08/25/2020

Common refrigerant charging methods for central air conditioners

In practical applications, the following methods are often used to detect whether the refrigerant in the refrigeration system is sufficient. Let's analyze the drawbacks of these charging methods:

08/14/2020

How did the sediment in the chiller come from

Water chiller is a kind of water cooling equipment that can provide constant temperature, constant flow and constant pressure cooling water equipment.

02/17/2023

Installation and Maintenance of Gearboxes

When you select gearbox model, four factors should be given comprehensive consideration.

06/25/2020

How to distinguish between screw refrigeration compressor and piston refrigeration compressor

Distinguish from type 　　 Screw refrigeration compressors and piston refrigeration compressors are both volumetric compressors, and screw refrigeration compressors are a new type of high-speed refrigeration compressors.

09/14/2020

Large oil consumption of the unit or high oil content of compressed air

The amount of lubricating oil is too much. The correct position should be observed when the unit is loaded. At this time, the oil level should not be higher than half;

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/14/2020

What should I do if the screw compressor fails

Nowadays, in the summer, the use of air conditioners is increasing. If the screw compressor fails, how to repair it? First, check out where the fault is. After the inspection, repair or replace the damaged parts, as follows:

03/08/2023

The Differences of Double Acting Cylinder and Single Acting Cylinder

the single acting cylinder acts on one end of the piston, while the double acting cylinder acts as one end of the piston.

08/06/2020

Principles that need to be followed when using antifreeze in industrial chillers

Principles that need to be followed when using antifreeze in industrial chillers<br></br> The role of antifreeze for industrial chillers is to prevent expansion and cracking of heat exchangers, pipes or engine cylinder blocks due to the freezing of the coolant.

08/30/2020

The basic knowledge of diaphragm coupling is very useful for air compressors, come and learn!

Coupling is a mechanical part used to connect two shafts (driving shaft and driven shaft) in different mechanisms to rotate together to transmit torque. In high-speed and heavy-duty power transmission