Danfoss Compressor SH195B6ACV

08/07/2020

What is a built-in air conditioner What should I do if the embedded air conditioner leaks

The embedded air conditioner is a very good air conditioner. The biggest difference between the embedded air conditioner and the ordinary air conditioner is the installation form of the embedded air conditioner.

03/04/2021

Advantages of servo motor

Precision: the closed-loop control of position, speed and torque, and the problem of out of step of stepping motor is solved; Speed: high speed performance, general rated speed can reach 2000 ~ 3000 rpm;

06/18/2020

The main reason for the slow heating of air conditioners

The main reason for the slow heating of air conditioners There are several reasons for the slow heating of air conditioners: 　　 The dirt of the transpiration device and the condenser is too thick, which will cause air flow blockage, affect the heat declaration, and make the air conditioning heating a big discount. The filter is not cleaned for a long time<img src="{{media url=&quot;wysiwyg/The_main_reason_for_the_slow_heating_of_air_conditioners.jpg&quot;}}" alt="" />

06/29/2020

Several causes of compressor burning

08/20/2020

Operation method for filling freon in refrigeration system of high and low temperature box

The operation method of filling Freon in the refrigeration system of the high and low temperature box is as follows: 　　1, prepare a scale, weigh the freon cylinder, and record the net weight of the total weight Leon.

06/14/2020

Before replacing the compressor, remember to do 10 things first, remember ~~

Before replacing the compressor, remember to do 10 things first, remember ~~ 1. Before replacing, you must check the cause of the damage to the original refrigeration compressor and replace the defective parts. Because damage to other components will dir器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ

08/31/2020

Talk about the artisan spirit of the compressor industry

The compressor industry is an important part of the manufacturing industry. If we want to do a good job in this industry, we need people to operate. The human factor is the key, especially the first-line skilled workers with certain skills. After all, they are the main force of production... ..

07/19/2020

Screw chiller-the operation process of refrigeration compressor!

Screw-type (ie twin-screw) refrigeration compressors have a pair of mutually meshing rotors with helical teeth in opposite directions. A rotor with a protruding tooth surface is called a male rotor, and a rotor with a concave tooth surface is called a female rotor. The teeth of the rotor are commensurate with the piston,

01/19/2023

The Differences between Solenoid Valves and Motorized Valves

The solenoid valve is an industrial equipment controlled by electromagnetic, which is the basic component of automation used to control fluid.

06/14/2020

Ways to reduce inverter harmonics

Insulation, shielding and grounding of the inverter: the power supply of the inverter system is independent of the power supply of other equipment. Or install an isolation transformer on the input side of the inverter and other electrical equipment. Or pu器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧֊識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ