Danfoss Compressor SH485A7AJD

06/18/2024

Hydraulic Symbols Explained (Hydraulic Pump, Hydraulic Motor, Hydraulic Cylinder, Hydraulic Valve, Accumulator Included)

The hydraulic system, also called a hydraulic pump station, hydraulic station, hydraulic oil station, etc., usually consists of power component, actuator, control component, auxiliary component, and working medium.

04/12/2024

Servo Motor Applications: a Complete Guide

Servo motors are widely used in various mechanical equipment. It has the characteristics of fast response, high precision and high reliability, and can achieve precise position control, speed control and force control.

09/14/2020

Explosion-proof human body static eliminator; explosion-proof human body static eliminator, petroleum-specific human body static eliminator

CM-003 touch static elimination ball, its appearance is made of stainless steel tube and stainless steel ball, it is suitable for chemical, metallurgy, military, oil field, fireworks, computer room, high-end hotels, high-end offices and other flammable and explosive places.

08/03/2020

How to deal with the problem of non-circulation of cold water in the chiller

Generally speaking, a small industrial chiller already contains a cold water circulating pump, and a chiller (large) does not contain a cold water circulating pump.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

06/29/2020

Analysis of the cause of excessive suction temperature of compressor

Analysis of the cause of excessive suction temperature of compressor The high suction temperature is mainly due to the increase of superheat of suction. Note that high suction temperature does not mean high suction pressure, because the suction is superheated steam. Under normal circumstances, the compressor cylinder head should be half cold and half hot. If the suction temperature is too high, the cylinder head will all heat up.

08/24/2020

What should I do if the suction pressure of the refrigeration unit is too low 7 major failure causes to know

In the pharmaceutical, food and other industries, refrigeration units are common equipment, providing reliable protection for various low-temperature environments such as pharmaceuticals.

01/04/2023

Parameters of the Solenoid Coil

The solenoid coil is tightly wrapped up on a core to form a solenoid. The main parameter of the solenoid coil is the size of the inductance.

08/24/2020

What to do if the compressor of screw chiller is damaged

The compressor is the core component of the chiller. Damage to the compressor is a very serious fault and needs to be dealt with in time, otherwise the chiller will not work.

09/07/2020

The technical knowledge of these three types of screw air compressors must be mastered by sales engineers

Sales engineers need to understand the basic principles of air compressors. I believe that the company has given a brief introduction after joining, so I won’t repeat them. If you still don’t understand, you can consult books.