Danfoss Compressor SH970A6ACX

08/20/2020

What is the difference between fresh-keeping storage, cold storage, freezer and controlled atmosphere storage

1. Fresh-keeping warehouse The storage temperature of the fresh-keeping warehouse is generally 0℃~5℃, which is mainly used to keep fresh, that is, to maintain the original quality and freshness of agricultural products for a long time,

07/14/2020

Dutch company develops high-tech air-conditioning equipment: it can be cooled without electric energy

Dutch company develops high-tech air-conditioning equipment: it can be cooled without electric energy US media said that according to the International Energy Agency, by 2050, nearly 6 billion air conditioners will consume 37% of the world's electricity.

08/20/2020

What are the factors that affect the cooling capacity of the chiller

A normal running chiller will always encounter a series of small problems after working for a period of time. The following is a brief description of the problem that affects the cooling capacity of the chiller. The influencing factors are as follows:

09/11/2020

Comparison of ball bearings and roller bearings

Comparison of ball bearings and roller bearings From the point of view of the contact with the raceway: Ball bearings are in point contact, and the contact surface is ellipsoid; while roller bearings are in line contact, and when force is applied, the contact surface is square.

06/25/2020

Compression refrigerator

A refrigerator that relies on a compressor to increase the pressure of a refrigerant to achieve a refrigeration cycle. Compression refrigerator is composed of compressor, condenser (condenser), refrigeration heat exchanger (evaporator), expander or throttle mechanism and some auxiliary equipment. The compressor is its core equipment.

06/29/2020

How the compressor works

03/02/2021

Related technical terms

1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.

03/08/2023

The Differences of Double Acting Cylinder and Single Acting Cylinder

the single acting cylinder acts on one end of the piston, while the double acting cylinder acts as one end of the piston.

08/24/2020

Emergency treatment of acute ammonia poisoning

Workers in the chemical industry know that ammonia (NH3) is a colorless irritating gas with a pungent and pungent odor at normal temperature and pressure; it is easily liquefied into a colorless liquid,

09/16/2020

Analysis of Frequency Conversion Technology in the Application of Air Compressor System

1. Operation principle and analysis of air compressor　　 As far as okmarts.com is concerned, the main equipment currently being renovated is basically a traditional screw air compressor. The air compressor is a load with a large moment of inertia.