Danfoss Compressor SM084A6PAR

08/15/2020

Precautions for industrial chiller compressor piping

Whether it is a chiller manufacturer or a user who uses a chiller, it is clear that the compressor is the most important component of an industrial chiller, so whether it is during installation or use,

09/06/2020

Classification of solenoid valves

Direct acting solenoid valve 　　 Introduction: 　　There are two types: normally closed and normally open. The normally closed type is closed when the power is cut off.

09/18/2020

Performance comparison between piston compressor and screw compressor

The noise of the piston engine is loud and the maintenance is inconvenient. Most piston machines often have problems during use, which brings great inconvenience to users. At the same time, it can reduce the production cost of the factory, increase economic benefits, facilitate equipment management

07/28/2020

Analysis of common failure causes of hermetic refrigeration compressors

. How to identify the 3 terminals on the casing of a hermetic compressor?<br></br> The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.

07/26/2020

There are 8 main reasons for the burning of air-conditioning compressors!

The air-conditioning compressor is the key component of the air-conditioning unit. The 8 main reasons for the air-conditioning compressor burnout are as follows:<br></br>

09/09/2020

Overview of lubricant bubbles

People who have worked in the field of equipment lubrication for many years understand the necessity of keeping lubricating oil clean and doing good pollution control. Air will also cause "pollution" to the lubricating oil. The lubricating oil should not only contain moisture, impurities, and other oil liquids,

03/01/2021

Performance characteristics of Panasonic Minas series Panasonic AC servo

The output power of Panasonic AC servo motor is generally 0.1-100 W, and the power frequency is divided into 50 Hz, 400 Hz, etc. It is widely used in various automatic control and recording systems 1.Miniaturization design 1) Through the best thermal analysis of the driver, the miniaturization is realized. Compared with the past, the volume is 75% and the weight is 80% 2) The new punching process of thin die steel plate has greatly reduced the iron loss, shortened the motor length (70% in the past) and reduced the number of drive models. It adopts current grading method to prepare and maintain. One driver is suitable for multiple motors and can identify automatically.

07/01/2020

How is the absorption refrigeration cycle of Taikang compressor

How is the absorption refrigeration cycle of Taikang compressor Taikang compressor is different from other brands of compressors, this feature is the absorption refrigeration cycle. Many people may not understand what is the absorption wet cooling cycle, it is composed of generator, absorber, condenser, evaporator, solution pump and restrictor.

08/18/2020

How to use air-cooled chillers to save energy and cost

Many companies need a low temperature environment when completing production tasks. Because companies use air-cooled chillers to reduce the environmental temperature, the cost is relatively low,

06/29/2020

Compression ratio of American Copeland compressor