Danfoss Compressor SM100T7XU

08/16/2020

The difference between duct air conditioner and split air conditioner

1. What is split air conditioner 　　 Split type is the name to distinguish it from the window machine. The compressor, condenser, evaporator and other components of the window air conditioner are all connected together.

08/12/2020

Four steps in the use of parallel compressors in cold storage

The use of parallel compressors focuses on four issues, as follows: 　　①Keep the oil level 　　② Countermeasures for liquid flood back 　　③Protection device and accessory parts device 　　④Confirmation of piping stress

07/19/2020

Industrial chillers-(singde) the basic requirements for the selection of lubricating oil!

Lubricating oil is to provide lubrication and cooling conditions for the moving parts of industrial chillers. The lubricating oil used in refrigeration compressors is usually called refrigerating oil, which is a highly refined special lubricant. Lubricating oil is used in the refrigeration compressor to lubricate the moving parts and reduce the friction between the surfaces of the moving parts.

07/21/2020

How to protect the refrigeration compressor, you must master the following knowledge!

When the compressor is running, some abnormal conditions may occur, such as: exhaust pressure is too high, suction pressure is too low, oil pressure is insufficient, motor is overheated, excess liquid enters the cylinder, etc. In the event of an abnormal situation, the compressor will be damaged if there is no protective measure.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

01/03/2023

How does Solenoid Coil Work?

Solenoid coils are built using the presence of a magnetic field around a wire. It is wound in a spiral shape to strengthen the magnetic field, i.e.

08/15/2020

What should I do if the refrigeration equipment does not operate normally

Nowadays, in order to prevent the goods from selling well and causing economic losses, more and more businesses are using Xuzhou refrigeration equipment to store excess goods or sell them in anti-seasonal times.

08/02/2020

Summary of parameters and phenomena of air conditioning refrigerationheating system

Summary of parameters and phenomena of air conditioning refrigerationheating system 1. R22 refrigeration working state parameters 　　(1) During summer cooling, the normal low pressure of the refrigeration system is between 0.4～0.59MPa.

08/14/2020

What is the hazard of high temperature to compressor motor and lubricating oil

The heat generated by the compressor during normal operation should not cause overheating. Normal motor heating, compression heat and friction heat have been carefully considered when designing the compressor,

12/02/2024

AB Kinetix 5500 Servo Drive Indicator Light and Fault Codes Explained

Common faults in AB servo drive maintenance include: no display, phase loss, overcurrent, overvoltage, undervoltage, overheating, overload, grounding, parameter errors, display but no output, module damage and other faults.