Danfoss Compressor SM100T9XO

06/14/2020

Failure analysis and analysis of other common failures of screw refrigeration compressor

The compression ratio of the screw machine is too large: it proves that this system completely deviates from the design value. The main phenomena are that the temperature of the exhaust temperature is too high, the suction pressure is too low, and the tem器2䀀
ￜ皥

09/14/2020

Application of oil-free lubrication technology in the cylinder of the high-pressure section of the piston-type nitrogen-hydrogen compressor

1. Raising the problem 　　 Compressor oil-free lubrication technology, as a new energy-saving technology, has been developed and applied to various compressors in various industries for more than 60 years.

06/29/2020

What is the cause of compressor pipeline vibration

07/19/2020

On the cause of the chiller compressor burning down

On the cause of the chiller compressor burning down During the use of the chiller, sometimes the irresistible external force or misoperation will cause the compressor to burn out. Once the compressor is found to be burned, it must be stopped immediately to avoid damage to other parts.

06/14/2020

The master disassembles the high-resolution atlas of the refrigeration compressor

The master disassembles the high-resolution atlas of the refrigeration compressor Share the process of dismantling and repairing the refrigerator compressor of a forum master

06/14/2020

The principle, installation and use of the bypass valve of the heater of the cold dryer Composition and principle of "heater bypass"

The principle, installation and use of the bypass valve of the heater of the cold dryer Composition and principle of "heater bypass" The energy regulation of the system is generally composed of the following ways: Compressor parallel-multi-stage contro器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ

06/14/2020

Common failures of half-sealed piston compressors

Common failures of half-sealed piston compressors 1. The compressor cannot start normally 1. First check whether the power supply voltage is too low or the motor line is poorly connected. If the grid voltage is too low, start again after the grid volt器2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵

08/10/2020

How should the two-way flow fresh air system be installed

At present, the fresh air system on the market is mainly divided into one-way flow and two-way flow according to the air supply method, and the two different air supply and exhaust forms are actually very different.

09/09/2020

What are the requirements of light industry for air compressors

The application industry of air compressors is very wide, which can be said to be all walks of life, but it is worth mentioning that different industries have different requirements for air compressors. Let's introduce the requirements of light industry for air compressors!

08/18/2020

How to judge whether the refrigeration effect of industrial refrigerators is good

The quality of industrial refrigerators can be judged by carefully understanding the cooling performance of the equipment. If during the long-term operation of the equipment, the operation safety and stability of the equipment is very high