Danfoss Compressor SM100W3VA

06/30/2020

Correct handling method of single compressor

Correct handling method of single compressor The handling of a single compressor is very particular and has strict requirements, that is to say, it is not how you want to move it.

02/26/2025

Air-Cooled Chiller Cooling Fan Problems and Solutions

Air-cooled chillers are one of the very important equipment in modern life, which is widely used in industrial, commercial and domestic environments to reduce and control temperatures in production and life.

07/23/2024

Refrigeration Solenoid Valve: Working Principle, Function, Selection ＆ Installation

Every valve in the refrigeration system is very important. Their cooperation enables the system to operate normally.

06/21/2020

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.

10/18/2024

Automobile Knowledge: What Are VVT, CVVT, DVVT, VVT-i, and VVT-iW?

VVT, CVVT, DVVT, VVT-i, and VVT-iW are often seen on many automobile engines. What do these logos mean? These logos reflect some of the unique technologies of automobile engines.

08/08/2020

Precautions for high-pressure cleaning shell and tube condenser

1. The main medium of the high-pressure cleaning shell and tube condenser is water. The water must be filtered before use to prevent impurities in the water from clogging the water pipe during cleaning

07/21/2020

Analysis of the application advantages and disadvantages of the five major refrigeration compressors

At present, semi-hermetic piston compressors are mostly used in the cold storage and freezing and refrigeration markets (commercial refrigeration and air conditioning are also useful, but they are relatively less used now). The semi-enclosed piston cold storage compressor is generally driven by a four-pole motor, and its rated power is generally between 60-600KW. The number of cylinders is 2-8, up to 12.

06/29/2020

Compression ratio of American Copeland compressor

09/04/2020

Screw air compressors have become an inevitable trend to replace traditional air compressors

In the recommended catalog of energy-saving technology and equipment just announced by the country, screw air compressors account for the majority, indicating that the country is strongly recommending high-performance products with technology and energy-saving

07/26/2020

This is a common failure of refrigeration compressors!

The excessively high suction temperature is mainly caused by the increase of suction superheat. Note that high suction temperature does not mean high suction pressure, because suction is superheated steam.