Danfoss Compressor SM110T3CBL

08/08/2020

How to choose a multi-effect evaporator

How to choose a multi-effect evaporator The selection of a multi-effect evaporator is mainly selected from the number of effects, the selection of the exhaust steam condenser, and the process. Finally, determine the heating area of ​​the evaporator.

07/19/2020

On the cause of the chiller compressor burning down

On the cause of the chiller compressor burning down During the use of the chiller, sometimes the irresistible external force or misoperation will cause the compressor to burn out. Once the compressor is found to be burned, it must be stopped immediately to avoid damage to other parts.

07/17/2020

Difference between original and refurbished Emerson Copeland Scroll compressor

Difference between original and refurbished Emerson Copeland Scroll compressor Now the most important thing for customers to buy compressors is whether they are genuine. Nobody wants to buy a fake machine after spending money. Here, we briefly introduce how to distinguish the authenticity of the Copeland compressor.

07/19/2020

Main components of screw chiller

The power of the screw chiller is relatively larger than that of the scroll type, and it is mainly used in central air conditioning systems or large industrial refrigeration. (1) Twin-screw refrigeration compressor: The twin-screw refrigeration compressor is an energy-adjustable oil-injected compressor.

07/06/2022

What is a Proportional Valve

A proportional valve provides a change in output pressure or flow in the same ratio as the change in the input, for example if the input doubles then the output will also double.

09/22/2020

On the development of compressors in the 21st century

In the 21st century, centrifugal compressors, reciprocating compressors, and screw compressors are the three mainstream compressors used in the chemical process and gas power fields. Centrifugal compressors dominate the development of centrifugal compressors: the large-scale industrial enterprises.

07/13/2020

Two products support half of Danfoss refrigeration business

Danfoss commercial compressor nameplate changes Danfoss piston compressors and scroll compressors have adopted a new nameplate since December 2015. At the same time, the compressor product brand and brand logo have also been adjusted.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

03/16/2021

How to maintain the servo motor driver?

In order to prolong the lifespanof the servo system, you should pay attention to the following aspects. For the operating environment of the system, the temperature, humidity, dust, vibration and input voltage need to be considered. Please regularly clean the ventilation system of the numerical control device. Always check whether the cooling fans on the numerical control device are working properly. It should be inspected and cleaned every six months or a quarter depending on the environment of the workshop.

07/18/2020

Working condition and adjustment of refrigeration system of low temperature chiller

Low-temperature chiller refrigeration system operating conditions and adjustments Nowadays, chillers are widely used in the refrigeration industry, and the refrigeration working fluid is usually R22 (also R404a) and so on. In order to facilitate operation and maintenance and reduce the installation location, the refrigeration compressor