Danfoss Compressor SM112T3XU

09/04/2020

Compressors and other inbound remanufacturing industries should also have high-standard access

After the United States formally proposed "remanufacturing" in the early 1980s, other industrialized countries also began to vigorously develop the remanufacturing industry.

08/02/2020

Treatment method after load damage of screw chiller

First of all, we must confirm whether the compressor load has been burned or the components have been worn away. If so, the refrigerant system will inevitably be contaminated. For example, residual refrigerant oil remains in the pipeline after carbonization

09/10/2020

Air Compressor Power Saving Reform Plan and Benefit

1. The feasibility of power saving transformation of air compressor The energy consumption of air compressors is obvious to all. The okmarts.com high-pressure fan power saver developed by okmarts.com based on the principle of frequency conversion can save electricity for all motor-driven air compressors. The overall power saving effect is remarkable, with a power saving rate of 20-50%.

06/29/2020

Several causes of compressor burning

07/04/2020

The compressor lacks oil, so the harm is so great!

The compressor lacks oil, so the harm is so great! Compressors are complex machines that operate at high speeds. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, and pistons is the basic requirement for maintaining normal operation of the machine.

08/20/2020

Air conditioner repairs are too messy the repairman has just walked for 10 minutes and the repaired air conditioner is broken again

"The air conditioner broke down after a while after it was repaired. Now I want to contact the maintenance company but I don't care what it says." Recently, as the temperature rises, the air conditioner usage rate has continued to increase

07/18/2020

Process and cause of liquid shock in piston refrigeration compressor

Piston refrigeration compressor liquid hammer process and reasons for liquid hammer 1. Introduction The phenomenon that liquid refrigerant and/or lubricating oil is sucked into the compressor cylinder with the gas and damaged the suction valve plate

06/19/2025

How to clean the air cooler

Today, the editor of okmarts.com will give you a brief introduction to the cleaning method of the air cooler. I hope it will be helpful to you!

08/10/2020

Four anti-corrosion methods for heat exchangers

There are four main anti-corrosion methods for heat exchangers: corrosion-resistant materials, electrochemical protection, adding corrosion inhibitors, and anti-corrosion coating methods.

02/27/2021

Some common faults and solutions of servo motors

The temperature of the motor is too high or the motor is faulty with smoke the reason: 1). Excessive load 2). Two-phase operation