Danfoss Compressor SM112W7PAB

09/22/2020

Compression and delivery of air compressor

The compressor can convert the mechanical energy of the motor or internal combustion engine into the pressure of compressed air. Air compressors are divided into two categories: reciprocating and rotary. The following figure shows the basic types of compressors:

09/03/2020

Rely on reliable oil-free air solutions to become a committed enterprise!

As one of the largest connector manufacturers in the world, Amphenol Group's products cover the communications market and information processing market, including cable television, mobile phones and data communications, information processing systems, aerospace, military electronics, automobiles, and railways.

06/29/2020

What is the cause of compressor pipeline vibration

08/17/2020

The heat pump is prone to frost between +4~-4℃. The symptoms and reasons are not beyond these 10 points.

The air source heat pump can use the low-grade heat energy in the ambient air, so it has the dual advantages of energy saving and environmental protection. However, one of the problems is that

08/21/2020

What are the hazards caused by the air entering the condenser of the freezer

The handling of water-cooled chiller failures must strictly follow scientific procedures. The chiller operator should not act without authorization and disassemble the water-cooled chiller at will when the situation is unclear,

06/25/2020

How to solve if the air conditioner is not cooling

If it is not in the cooling state, we can adjust it to the cooling mode; if the dust accumulation of the air conditioner severely reduces the cooling function, we can find professional personnel to disassemble the evaporator, fan blade, and filter. Completely clean up; if it is because no refrigerant is added, then we can add refrigerant.

08/13/2020

Compressor in the industrial chiller system produces wet stroke fault and troubleshooting

In the industrial chiller system, when the compressor sucks in wet steam, frost occurs on the cylinder wall, and the suction temperature and discharge temperature drop significantly. This is the wet stroke of the compressor, commonly known as frost.

06/29/2020

Compressor protection measures against liquid strikes

Compressor protection measures against liquid strikes When too much liquid enters the cylinder and it is too late to discharge it from the exhaust valve, a liquid blow will occur in the cylinder. The high pressure generated during the liquid blow damages the cylinder, piston, connecting rod, etc., so it is necessary to take a Series of protective measures.

07/30/2020

11 common problems with refrigeration compressors, do you know these?

Impurities entering the friction surface of the moving parts of the compressor pump body will cause abnormal scratches and wear. Impurities entering the solenoid valve, expansion valve, control valve, capillary tube and stop valve in the refrigerator system will block the valve hole or make the valve close tightly. And fail.

08/05/2020

How to solve the common old problems in the operation of chillers

In the pharmaceutical, food, chemical and other industries, process water cooling is required. The chiller has become a must-choice equipment for many industries.