Danfoss Compressor SM120W4RO

09/16/2020

Why can't I repair the cold welding machine Easy to fall off

Question: Why can't the patching machine be fixed? Easy to fall off? Answer: The main reasons for the failure to fix are: 1. The surface of the mold is not cleaned, and there are impurities such as oil, dirt, and oxides between the supplement and the mold.

08/19/2020

When the low-temperature chiller has poor cooling effect, it should be dealt with in time

When companies use low-temperature chillers, in order to avoid all kinds of small faults from harming the normal use of low-temperature chiller equipment, companies need to be able to operate the equipment according to safe use standards when using low-temperature chillers.

09/11/2020

Provide compressed air without oil, water and dust

The drying effect is achieved through the principle of pressure swing adsorption. Not only can it be matched with a small air compressor, but it can also meet the needs of local users with special requirements behind the large air compressor, so as to avoid the high air quality requirements of individual points and the high configuration of the entire equipment to save investment.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/12/2020

Problems that should be paid attention to when selecting plate heat exchanger

1. Board type selection<br></br>　　 　　The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion.

06/14/2020

Refrigerating oil replacement and internal cleaning

Refrigerating oil replacement and internal cleaning The operation of draining oil is as described above. After the freezing oil is removed and the pressure inside and outside the compressor is balanced, use an allen wrench to loosen the flange bolts and 器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧٢識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ

08/16/2020

The difference between duct air conditioner and split air conditioner

1. What is split air conditioner 　　 Split type is the name to distinguish it from the window machine. The compressor, condenser, evaporator and other components of the window air conditioner are all connected together.

07/05/2020

Hitachi 6HP Inverter Compressor-Compressor

Hitachi 6HP Inverter Compressor-Compressor Why is frost formed between the electronic expansion valve and the compressor? A customer asked: The compressor is suddenly not cooling, and the electronic expansion valve is frosted to the compressor. Is there any relationship between the two before?

09/09/2020

Principle of oil bath air filter

The filter is cylindrical, and the cylinder is divided into three parts: the outer cylinder, the inner cylinder, and the air outlet pipe. The upper part of the inner part is a swirling plate (or guide vane) and a filter screen, and the lower part is connected to the outer cylinder, and the bottom of the cylinder is filled with compressor oil (waste oil).

06/13/2024

How to Select a Right Solenoid Valve? Selection Guide for Beginners

The solenoid valve is an industrial electromagnetic device used to adjust the direction, flow, speed, etc. of the medium.