Danfoss Compressor SM120W7AL

06/29/2020

How the compressor works

06/30/2022

4 Practical Types of Piston Pump

Types of piston pump – Pumps have become an indispensable component of all domestic and industrial applications.

06/14/2020

Centrifugal compressor

Centrifugal compressor

08/02/2020

How to use refrigerant to empty the air conditioner after installation

Air, moisture and impurities contained in the air will cause pressure increase, current increase, noise increase, and power consumption increase in the air conditioner system, which will reduce the cooling (heat) capacity, and may also cause ice blockage and dirty blockage.

07/16/2022

Common Faults of Gear Pump

Cause: A. the rotation direction is opposite; B. the suction or discharge valve is closed

08/24/2020

How to determine the demand for precision air conditioners

Precision air conditioners are high-precision air conditioners used in computer rooms that can control the temperature and humidity of the computer room. Its design is to solve the large load heat density in the data center.

08/20/2020

Influencing factors and measures of energy saving in air conditioning and refrigeration systems

The use of electrical equipment has a huge demand for energy, and the refrigeration industry has become an important industry in my country's household appliances.

01/11/2021

Nine reasons to choose Mitsubishi Electric's central air conditioner

Nine reasons to choose Mitsubishi Electric's central air conditioner With people's pursuit of quality life, more and more consumers tend to choose home central air conditioners. Today I will explain in detail the nine advantages of Mitsubishi Electric 器2䀀
ￜ皥
䖒皦즠Ʋ㎄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㎎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ


08/20/2020

What is a screw compressor economizer

As we all know, in fact, in many refrigeration systems, where screw compressors are used, economizers must be matched. So do you know why screw compressors use economizers? How can economizers play its greatest role?

06/20/2020

What are the causes of air conditioning trip

What are the causes of air conditioning trip 1. The contradiction between the rated current of the air conditioner and the current carrying capacity of the wire. 　　Here are two formulas involved: 　　①The rated current of air conditioner I=P÷U ÷power factor, the power remains unchanged, the smaller the voltage, the greater the current required. 　　② The current carrying capacity of the wire I=U÷R, the voltage is proportional to the current. 　　 So when the power supply voltage is normal, we must consider the line voltage drop. The longer the line, the greater the resistance, the greater the voltage drop, and the smaller the output current at the end. However, because the power of the load remains unchanged, the voltage becomes smaller, and the current that needs to be output will be larger. At this time, the wire is forced to overload, and the time will cause heating, and eventually cause the tripping of the open circuit. 　　 Some friends said that the heat of the wire will not cause the tripping of the circuit breaker. In fact, the manufacturer of the air switch has made it clear in the relevant manuals that the heat of the wire will cause the air switch to trip. Because the wire heats up, the crimp terminal will also heat up, and the resistance will become larger and larger. The larger the resistance, the greater the current consumption, and the hotter it will be, a vicious cycle. 　　 2. Leakage 　　During the daily maintenance work, we will encounter the situation that the air circuit trips due to the leakage of electricity. At least I have not experienced it once or twice. Regardless of the leakage of the neutral line or the leakage of the live line, a long time will cause the circuit breaker to trip. 　　Why does the electric leakage cause the MCB to trip? There are two situations. 　　 ① Good grounding. At the beginning, the leakage current was not large, and as time went by, the leakage current became larger and larger, and eventually evolved into a short circuit to ground, unable to close. 　　②There is no ground wire. If the equipment is not connected to the protective ground, when the wire leaks to the equipment, it is equivalent to adding a large shunt resistance. Like this problem, if the air conditioner does not have a ground wire, when the wire leaks to the air conditioner, the air conditioner is a very large shunt resistor and will consume a lot of current. Eventually, the wire will heat up or trip open. 　　How to determine whether the trip caused by the above two aspects can be done with a clamp ammeter. 　　 ① Measure the voltage at the input and output to see if there is a significant change in voltage drop. 　　②Measure whether the output current exceeds the standard. 　　 So my suggestion is: first measure the supply voltage to see if it is within the allowable fluctuation range. Then measure the current to see if it exceeds the rated ampacity of the wire. Finally, check the data one by one according to the measured data to find out the reason.