Danfoss Compressor SM124A4CAU

09/04/2020

The development prospects of medical gases and equipment in Asia

Medical gas is the gas used in the medical industry indirectly or directly. Medical gas equipment refers to the equipment used to produce medical gas. In addition, medical gas is mainly used as a coolant and disinfectant directly in patients or medical procedures.

06/14/2020

Causes and harms of non-condensable gas produced by refrigeration system

Non-condensable gas refers to air, hydrogen, nitrogen, lubricating oil vapor, etc. mixed in the refrigeration system.

07/08/2020

This is the key method to solve the leakage problem of fan coil

The fan coil and fresh air system is a widely used air-conditioning method. Because of its flexible layout and the ability of each room to be adjusted independently, it is commonly used in hotels, hotels, office buildings, hospitals and other buildings. However, many problems are often caused by mistakes in construction and design, and the most common one is water leakage.

06/14/2020

This summer, the air-conditioning market is popular with sterilization, fresh air or a new engine for growth

This summer, the air-conditioning market is popular with sterilization, fresh air or a new engine for growth The winter air-conditioning market in 2019 ended with a price war, and then the new crown epidemic hit the offline market again.

06/29/2020

What is the cause of compressor pipeline vibration

09/07/2020

Lubricant-Protector of Industrial Equipment

Reducing friction is one of the main purposes of lubricating oil. In addition, lubricating oil has other functions. For example, the lubricating oil film can prevent rust; prevent metal from being corroded; the lubricating oil can also play a cleaning role.

08/13/2020

Some common ways to reduce noise in cooling towers

Taking a circular countercurrent cooling tower as an example, the basic principle of its operation is: dry and low enthalpy air enters the cooling tower from the lower part of the cooling tower;

09/08/2020

The difference between air-cooled and water-cooled screw air compressors

The difference between air-cooled screw machine and water-cooled screw machine: 　　The oil cooler of the air-cooled screw compressor and the compressed air after-cooler are made into one body. It is an aluminum plate-fin structure and brazed in a vacuum furnace. Once the oil leaks, it is almost irreparable and only replaced. The working principle is that hot oil and high temperature (about 80℃) gas flow in their respective pipes,

07/18/2020

Explanation of the excellent performance of each component of the screw chiller

　The application of screw refrigeration compressors is becoming more and more common, and some of them have entered the period of frequent failures. When the abrasion of the female and male rotors, body, and exhaust end seat of the refrigeration compressor reaches above 0.65rnm, vibration will occur when the refrigeration compressor is running, the sound is abnormal, the cooling capacity is reduced, and the compressor cannot work normally.

08/19/2020

What are the tips for purchasing a screw chiller for the first time

Screw chiller is named screw chiller because of its key component-the compressor adopts screw type. The state of the unit from the evaporator is gas refrigerant; after adiabatic compression by the compressor, it becomes a high temperature and high pressure state.