Danfoss Compressor SM124A6CBV

06/23/2020

How to add air conditioning refrigerant

Turn off the power supply of the air conditioner first; if all the light leaks, then you must evacuate before adding it; find the thick tube under the outdoor unit and add fluorine from here; you need to install the pressure gauge when adding fluorine Generally, it can be stopped at about 5 pressures; the temperature needs to be turned to the lowest when turning on the machine, and observe for about half an hour.

08/09/2020

Common fault solutions and improvement measures of air energy heat pump compressor

The air energy heat pump system is widely used in hot water, heating, drying and other fields. Its characteristic is that most of the heat energy comes from the low temperature heat energy in the air energy,

09/21/2020

How to maximize bearing life

How to maximize bearing life In theory, the service life of rolling bearings in centrifugal pumps is 20,000 to 80,000 hours, but the actual life depends on many

07/03/2024

Proportional Valve vs. Solenoid Valve vs. Servo Valve

The way the valve controls the fluid can be divided into two types: one is on/off control, either fully open or fully closed. Examples for this type of valve include ordinary direct-acting solenoid valves, solenoid-operated directional valves, electro-hydraulic directional valves, etc.

08/18/2020

How to choose a pump that matches the industrial chiller

In the process of producing and assembling the chiller, the chiller factory needs to pay attention to and determine the accessories, not only the so-called key components such as compressors, evaporators, and condensers, but also some seemingly unimportant components, such as water pumps. !

08/17/2020

What problems with industrial chillers will alarm

In the process of using industrial chillers, many problems will cause industrial chillers to alarm. There are also many ways to alarm, usually light alarm, sound alarm and code alarm.

06/29/2020

Compression ratio of American Copeland compressor

09/21/2020

Working principle and usage method of motor bearing grease

Working principle and usage method of motor bearing grease The lubrication of the motor bearing relies on the lubricating oil that is precipitated when the three-dimensional fiber network structure in the grease is broken under the action of shear, forming a layer of lubricating film on the rotating elements of the bearing, the bearing seat and the bearing race for lubrication Effective.

09/09/2020

How big the air compressor is, these two technical parameters must be known

People often come to inquire about how much it costs to buy a screw air compressor, but when I ask the person how big a screw air compressor you need, many users really can’t answer and cannot determine the size of the air compressor.

09/04/2020

Advantages and applications of cast copper rotors in high-efficiency motor remanufacturing

The 2017 Green Production and Consumption International Exchange Conference was held in Shangyu District, Shaoxing City, Zhejiang Province from November 9th to 10th. The exchange meeting was co-sponsored by the China National Institute of Standardization