Danfoss Compressor SM147T4CH

08/18/2020

Basic composition of industrial chiller refrigeration system

We must fully understand the components of the industrial chiller refrigeration system in order to be foolproof in use.<br></br> 　　1. Condenser: In the refrigeration process, the condenser plays a role in outputting heat energy and condensing the refrigerant.

09/22/2020

Discussion on Calculation Method of Surge Line of Rich Gas Compressor

1 Introduction The catalytic cracking rich gas compressor is a kind of compressor, which is very representative. For this reason, the catalytic cracking rich gas compressor is taken as an example to discuss the calculation method of the surge line of the rich gas compressor control system.

08/15/2020

Cold storage operation maintenance and management methods

1.Booting and preparation before booting Before starting up, check whether the valves of the unit are in normal starting state, check whether the cooling water source is sufficient, and set the temperature according to the requirements after the power is turned on.

08/20/2020

What is the role of moisture barrier in cold storage cost engineering

What is the role of the moisture barrier in the cold storage cost project? Some people think that it doesn't matter whether it is used or not, and it can save a little cost if it is not used. In fact, it is not as simple as you think.

08/20/2020

How to adjust the energy of the compressor of the screw chiller

The compressors used in screw chillers generally have brands such as Taiwan Hanbell and German Bitzer, which belong to the screw compressor series. An obvious feature of this type of compressor is that it can perform an energy adjustment action on it according to different

06/14/2020

External balance thermal expansion valve

The difference between the external balance type thermal expansion valve and the internal balance type in structure and installation is that the space under the diaphragm of the external balance type valve is not in communication with the outlet of the va器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ۖ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ

06/29/2020

How the compressor works

08/06/2020

How to prevent cold bridge phenomenon in cold storage construction

In the cold storage, the so-called "cold bridge" is actually a bridge that transfers heat. In adjacent warehouses with different warehouse temperatures or between the inside and outside of the warehouse

08/19/2020

Technical standards and selection principles of explosion-proof chillers

Explosion-proof water chillers are specific explosion-proof measures based on standard water chillers to prevent electrical equipment from igniting the surrounding explosive gas environment.

07/17/2020

Reasonably adjust the cold storage evaporator and defrost in time

Reasonably adjust the cold storage evaporator and defrost in time Generally speaking, every increase in the cold storage evaporation temperature can save energy Therefore, under the premise of satisfying the low refrigeration process of the product, the evaporation temperature can be increased as much as possible by adjusting the amount of liquid supplied. The thermal resistance of the frost layer is generally much larger than the thermal resistance of the steel pipe.