Danfoss Compressor SM148T9CBG

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

03/08/2021

AC servo driver wiring precautions

For signal line and encoder input line, please use shielded wire. Wiring length: the length of signal line from NC to AC servo driver is less than 3m, and the length of input line from AC driver to encoder is less than 20m. The ground wire should be thick wire as far as possible. According to the third grounding standard (grounding resistance < 100 Ω), one point grounding method should be adopted to connect the ground wire. If the motor and the machine tool are insulated, the motor should be grounded.

07/30/2020

What are the common faults of refrigerators?

Freezers are an indispensable piece of household appliances. After long-term use, more or less problems will occur.

09/15/2022

Hydraulic Piston Motor: Types, Working Principle and Pros and Cons (2)

The structure of the <strong>axial piston motor</strong> is basically the same as that of the axial piston pump.

07/27/2020

Cause analysis of common failures of compressors with heat transfer oil heating system

Cause analysis of common failures of compressors with heat transfer oil heating system<br></br>

09/03/2020

How much do you know about the precautions of the operation control system of the air separation plant

The air separation unit adopts cryogenic technology, which uses the different boiling points of oxygen and nitrogen gas at the same pressure to achieve gas separation and extract oxygen,

07/29/2023

Quiet Your Heat Pump: Causes and Solutions to Heat Pump Noise

Heat pumps are an excellent investment for heating and cooling your home or office. They are energy-efficient, eco-friendly and cost-effective compared to other HVAC systems. However, one of the common concerns that homeowners have is the noise generated by heat pumps.

09/10/2020

How does the factory manage the air compressor room

As an important form of energy generation, air compressors are widely used in various industries, and there are many details in their maintenance. The service life of the air compressor can be prolonged after maintenance. Therefore, how to manage the air compressor room also plays a certain role in the maintenance of the air compressor.

09/08/2020

The function and basic performance of the pressure reducing valve of the compressed air filter

The filter, pressure reducing valve and lubricator together form a pneumatic triplet. The filter is mainly responsible for filtering the liquid water, oil and impurities in the compressed air, the pressure reducing valve is mainly responsible for controlling the system pressure, and the oil mist device is responsible for the oil lubrication of the back-end components.

06/21/2020

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high

[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.