Danfoss Compressor SM160W7YX

07/27/2020

Content overview: compressor operating principle, A/C switch function, difference between internal and external circulation air intake system

The season of using cold air-conditioning is coming: how to use the A/C switch and the operating principle of the car air-conditioning system. These two points are necessary for car users to understand some knowledge; especially the switching method of internal and external circulation, in different modes The ability of air purification and filtration will vary greatly. Let's talk about the air conditioning system of a car.<br></br>

08/05/2020

Why does the refrigeration compressor produce overheat protection What matters should be paid attention to in the use of overload protector

The working principle and classification of the overload protector. The overload protector of the compressor for air conditioning generally adopts a snap-type bimetallic protector, which consists of a heating wire,

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/04/2020

How much do you know about the uses of industrial gas

With the rapid development of China's economy, industrial gas, as one of the basic industrial elements of the national economy, has become increasingly prominent in its important position and role in the national economy.

06/14/2020

The air conditioner power is 4500w, and the 4A power cord 32A is open, why is it always tripped

The air conditioner power is 4500W, 4 square power cord, and the 32A air switch will trip for a period of time, because it can run for a period of time, so it is not a problem of excessive starting current, so let's analyze the power is 4500W Air conditio器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ

07/23/2020

9 usage details that affect the life of air conditioners

1. Clean the air filter frequently. Usually clean once every 2-3 weeks. The steps are: remove the panel; pull out the air filter; clean the air filter. Rinse the air filter under the tap. Since the filter is made of plastic frame and polyester silk, it should not be cleaned with hot water above 40℃ to prevent shrinkage and deformation.

07/23/2020

R410a and R22 refrigerant comparison application and installation specifications

1.Introduction to the properties of R410a refrigerant<br></br> 1. R410a is a HFCs refrigerant mixed with two working fluids of R32 and R125 at a mass fraction of 50% and 50%. It is a near-azeotropic mixture (pseudo-azeotrope), and its thermal performance is close to a single working fluid.

09/09/2020

The formation and harm of carbon deposit in air compressor

How does air compressor coke formation form? The reasons for the formation of carbon deposits in air compressors are more complicated. In terms of air compressor oil lubrication, the main reason is that the oil used in the internal lubrication system of the air compressor is often in the form of mist and high temperature, high pressure, high oxygen partial pressure air and metal The contact of the catalyst causes the air compressor oil to rapidly oxidize and deteriorate.

06/22/2020

Reasons for poor cooling of air conditioners

The temperature in summer is high, and many of the owners' friends need air conditioning to spend the hot summer in the room. However, some owners often have such problems when using air conditioning in summer, such as poor air conditioning cooling. So, what are the reasons for poor air conditioning and cooling? How to solve the poor air conditioning and cooling? One of the reasons for poor air-conditioning and cooling: Freon is not enough (commonly known as fluoride deficiency) <img src="{{media url=&quot;magefan_blog/Reasons_for_poor_cooling_of_air_conditioners.jpg&quot;}}" alt="" />

09/09/2020

The relationship between high temperature of air compressor and air compressor

The degree to which an object is hot or cold is called temperature (heat). We know from the law of conservation of energy that work and heat can be mutually converted, and the increase in temperature everywhere in the compressor is converted from mechanical friction work and compression work.