Danfoss Compressor SM161W7PAX

06/27/2020

Compressor installation

　　　　　　　　　　　　　　 Chapter 1 General Provisions 　　 Article 1 This chapter is applicable to the installation of reciprocating piston type, screw type, vane type and membrane type positive displacement compressors.

08/23/2024

Refrigerator Buying Guide: How to Choose a Refrigerator (Part 2)

Freezing capacity is the weight of food frozen to -18℃ in 12 hours by a refrigerator. The stronger the freezing capacity, the faster it can lock the freshness and moisture of the ingredients through ice crystals.

08/07/2024

Car AC System: Main Components Explained

The air conditioning system is a closed-loop working system, mainly composed of compressors, condensers, expansion valves, evaporators and other components.

02/13/2025

Advantages and disadvantages of screw refrigeration compressors

Screw refrigeration compressor is a rotary positive displacement compressor. It uses the change of the cogging volume and position of the screw to complete the process of vapor suction, compression and exhaust. Oil-free screw compressors came out in the 1930s, mainly used to compress air. Later, the oil-injected screw compressor appeared in the cylinder,

05/10/2022

Common Faults and Solutions of Solenoid Valve?

Detection method: First, measure its make-break with a multimeter. If the resistance value approaches zero or infinity, it indicates that the coil is short circuited or open circuited.

05/16/2022

What is Air Cylinder?

The cylinder is a cavity ( in which the piston is placed ) on the block of the internal combustion engine. It is the track of piston movement in which gas burns and expands.

08/14/2020

The difference between independent and non-independent refrigeration units

The cold storage is a special place dedicated to refrigeration, and now it is mainly used to keep food fresh. With the increasing requirements for the freshness of food, the use of cold storage is gradually increasing.

06/29/2020

Compression ratio of American Copeland compressor

08/24/2020

Normal operating conditions of the refrigeration system in operation

1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature and 5-10℃ higher than the brine temperature;

08/20/2020

How to prevent high temperature alarm of industrial chiller in summer

In the high temperature and hot summer, the frequency of use of industrial chillers is the highest in a year, and summer is also the season when industrial chillers have the most frequent high temperature alarms.