Danfoss Compressor SM175A9AN

08/14/2020

How does the cold storage refrigeration system supplement and discharge refrigerant

The cold storage refrigeration system must ensure that the refrigerant is dry when adding refrigerant (only applicable to fluorine refrigerant refrigeration systems),

08/02/2020

The hazards and causes of high exhaust temperature of cold storage compressor

The discharge temperature of cold storage compressors should generally be 15~30℃ lower than the flash point of the lubricant, and not too high.

09/05/2020

What is the difference between single screw compressor and twin screw compressor

Single-screw and twin-screw manufacturing process of twin-screw is more complicated than single-screw in terms of structure, and the difference in service life and working efficiency is not very big,

08/24/2020

You need to be cautious when buying air conditioners.

The hot summer is the peak season for air conditioning sales. A citizen in Los Angeles bought a home central air conditioner, but it failed repeatedly. An appraisal found that this product was not the original brand in the purchase contract.

08/19/2020

The lower the cold storage temperature, the better is a misunderstanding

Most professional refrigeration professionals believe that the lower the temperature the cold storage is built, the better, and the shelf life of ice storage can be extended. Experts say this is actually a misunderstanding

09/06/2020

Application advantages of micro heat adsorption dryer

With the advancement of science and technology and the improvement of people's living standards, in the fields of industry, food and medicine, the requirements for compressed air quality are getting higher and higher, and all walks of life have corresponding requirements for compressed air quality.

08/15/2020

What should I do if wall cracks appear after the cold storage is built

After the construction of the cold storage project, there may be many problems. For example, we have seen a lot of news recently. It is said that the wall cracks appeared after the construction of the cold storage

06/29/2020

How the compressor works

06/03/2025

Reasons and necessity of overhaul of oil-injected twin-screw air compressor

The structure of the main engine (also known as the head) of an oil-injected twin-screw air compressor is usually composed of a pair of mutually meshing screws, main engine casing, high-pressure end and end cover, and low-pressure end and end cover.

04/25/2025

Cooling Tower Troubleshooting and Solutions

Cooling towers are commonly used equipment in industry, air conditioning and other fields, and are used to remove the large amounts of heat generated during the production process.