Danfoss Compressor SM175T6CBD

08/20/2020

Placement of the thermostatic valve bulb

The bulb should be as close as possible to the outlet of the evaporator and placed in close contact with the outlet pipe. In the part of the pipe section where the temperature bulb is in contact with the pipe,

08/06/2021

Something You Need to Know about Using the Car AC after Stop

In summer, many people like to park their cars on the side of the road, opening the air conditioner for a long time.

09/06/2020

Application of synthetic compressor oil

At present, synthetic lubricants are widely used in the compressor field. Among them, oil-injected and oil-immersed rotary screw air compressors and large reciprocating compressors are one of the most used markets. For example, the sales volume of synthetic compressor oil in Western Europe was 6000t in the late 1980s, and it rose to 10000 in the early 1990s. The sales volume in the United States has exceeded 15,000 tons, and it is increasing at a rate of more than 10% per year.

08/02/2020

What to do when the cold storage is cooled for the first time

Before the cold storage is put into production, the installation and debugging of the low-temperature cold storage is a very important content. Only by debugging the temperature can the temperature in the cold storage be reduced to the temperature you need,

06/29/2020

How the compressor works

04/01/2025

FANUC Common Fault Alarm Analysis

1. The system alarm displays 9056, and the <a href=”url”>FANUC spindle amplifier</a> alarm code displays 56.

08/12/2020

After reading this article, completely get rid of the phenomenon of centrifugal refrigeration compressor surge

Centrifugal refrigeration compressor is a speed compressor, which is a kind of impeller rotating machinery. It relies on the high-speed rotating impeller to do work on the gas to increase the gas pressure.

07/18/2020

A coup to avoid the oil return problem of the refrigeration compressor of the piston chiller

Compressor: It is a complex machine running at high speed. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, pistons, etc. is the basic requirement for maintaining the normal operation of the machine. For this reason, compressor manufacturers require the use of specified grades of lubricating oil, and require regular inspection of the lubricating oil level and color

09/14/2020

Analysis of why the compressor shell will condense

When the compressor is working normally, it is close to the low pressure cavity of the compressor. The temperature of the steel casing on the side is very low, if the compressor casing

01/14/2021

compressor! Oscillating compressor: In the usual sense, a rotary compressor uses a jack to push the rotor to work.

compressor! Oscillating compressor: In the usual sense, a rotary compressor uses a jack to push the rotor to work. The biggest disadvantage is that the contact point between the jack and the rotor is prone to aging and wear due to the small contact surfac器2䀀
ￜ皥
䖒皦즠Ʋ㉄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㉎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ