Danfoss Compressor SM185W4PBG

06/14/2020

Analysis and solution of the three reasons for the high temperature of the exhaust of the compressor dryer

Analysis and solution of the three reasons for the high temperature of the exhaust of the compressor dryer

11/15/2024

Understand VFD Better by Wiring the Main Circuit and Control Circuit

1.1 Open the cover by squeezing the grooves on both sides of the VFD(variable frequency drive), remove the wire baffle, connect the terminals R, S, T to the power, connect the terminals U, V, W to the motor, and connect the earth wire at the ground symbol.

07/27/2020

How to maintain car air conditioners in summer is recommended to owners!

Summer is coming, and air conditioning is an indispensable product for everyone. In the hot summer, life without air conditioning is really impossible.

07/01/2020

Product Features of Copeland Compressor

Product Features of Copeland Compressor Among the many brands of compressors, the US Copeland compressor is one of the larger-selling products and is loved by consumers. When it comes to Copeland compressors in the United States, it is naturally different. How is it different from other compressors, we can learn through the following Copeland compressor product features.

04/18/2023

How a Refrigeration Compressor Works

The refrigeration compressor is the core component of the refrigeration unit, and plays a decisive role in the running performance, noise, vibration and service life of the system.

08/08/2020

Four methods to detect air conditioner noise

Four methods to detect air conditioner noise Air-conditioning noise is the noise generated by the air-conditioning system when it is working, including the noise generated by the fan escaping into the room, and the regeneration noise at the end of the air–ﰨ2

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

09/05/2020

Who has the final say on equipment shutdown for maintenance

In enterprises, the equipment should be subject to preventive maintenance. According to the set cycle, the equipment should be shut down for repair. Usually production scheduling has the final say.

09/10/2020

How does the factory manage the air compressor room

As an important form of energy generation, air compressors are widely used in various industries, and there are many details in their maintenance. The service life of the air compressor can be prolonged after maintenance. Therefore, how to manage the air compressor room also plays a certain role in the maintenance of the air compressor.

06/29/2020

Compression ratio of American Copeland compressor