Danfoss Compressor SZ147A6VE

09/13/2022

Differences between a Sensor and an Actuator

A sensor is a detection device that can sense the measured information, and can transform the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission

09/06/2020

Analysis of common failures of motors and solutions

As an important power provider that is indispensable in people's production and life, electric motors will generate serious heat during use, but many times do not know how to solve them.

08/28/2020

See the real chapter for details, small technology to solve big problems-talk about tunneling effect and its improvement

In the introduction of adsorption dryers, the term "tunneling effect" is often mentioned. So what exactly is "tunneling effect"? We call the phenomenon of uneven air distribution in the drying tower, rapid flow in the middle and slow flow at the edges as Rﰨ2䀀湠癒Vǜ

09/07/2020

The role of the frequency converter on the air compressor

The frequency converter is a very important controller on the air compressor. The use of the frequency converter in the air compressor system is precisely to make the air compressor system

03/27/2025

Cooling Fan Basics: Structure, Working Principle Diagram, Speed, Air Volume, Types

The cooling fan must be familiar to everyone. Computers, water dispensers, refrigerators, air conditioners, air purifiers, automobiles, etc.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/11/2020

Several Improvements on the Easy Failure Points of Air Compressor

The original compressor has poor cooling effect and low efficiency. The improvement method is to introduce the water that enters the primary and secondary cylinders and the intercooler directly from the main pipe to the water collecting funnel after cooling.

11/15/2024

Understand VFD Better by Wiring the Main Circuit and Control Circuit

1.1 Open the cover by squeezing the grooves on both sides of the VFD(variable frequency drive), remove the wire baffle, connect the terminals R, S, T to the power, connect the terminals U, V, W to the motor, and connect the earth wire at the ground symbol.

07/16/2020

How to see if the refrigerant leaks in the high and low temperature test chamber

How to check whether the refrigerant leaks in the high and low temperature test box; the standard high and low temperature test box and the constant temperature and humidity test box are all selected by the air-cooled compressor, and the working principle is the same as that of the air conditioning refrigeration

08/04/2020

Several important issues that should be paid attention to when installing and debugging the inverter on site

nverter is an electric energy control device that uses the on-off action of power semiconductor devices to transform industrial frequency power into another frequency.