Danfoss Compressor SZ175A4VY

03/06/2024

Intake vs. Exhaust Fans: Understanding Their Roles, Differences ＆ Applications

In the realm of ventilation and climate control, the roles of intake and exhaust fans are pivotal.

06/29/2020

Several causes of compressor burning

08/08/2020

How to understand the real temperature commonly used in air conditioners

The response of the surrounding air environment to human physiology is not the effect of a single factor, but the total effect of combining the temperature, humidity and air velocity of the surrounding air.

08/05/2020

How to solve the problem of too high compression ratio of chiller

In the process of using industrial chillers, various problems will inevitably occur. Due to the structure of the industrial chiller, once the compression ratio of the compressor is too high, it will affect the working efficiency of the industrial chiller.

06/14/2020

What is the difference between heating 24 ℃ and cooling 24 ℃

Regardless of the room temperature, as long as the air conditioner is in the cooling mode and is in a working state, the wind blown out is cold wind. To put it bluntly, the temperature of the blown air is determined by the operation mode of the air condit器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥

09/04/2020

Analysis of the advantages and disadvantages of 5 types of compressors

There are mainly 5 types of compressors, piston compressors, rolling rotor compressors, turbo compressors, screw compressors, and centrifugal compressors. This article briefly introduces the advantages and disadvantages of various compressors.

09/02/2020

The actual drilling depth of different air compressor drilling rigs, see what the drilling master says

When the general drilling industry purchases an air compressor, they are more concerned about the drilling depth of the air compressor, but those who sell the air compressor generally do not know the actual drilling depth of the air compressor.

12/02/2022

How do Linear Guideways Work?

The linear guideway is a new type of rolling bearing for relative reciprocating linear motion. It uses the ball rolling between the guide rail

09/06/2020

What should I do if the bearing is broken

How to judge whether the bearing can be used again and the defect that needs to be replaced 　　To judge whether the bearing can be used again, it should be decided according to related factors such as bearing damage level, mechanical performance, importance, operating conditions, inspection period, etc.

08/11/2020

Which three points should refrigerating machine manufacturers pay attention to when doing air tightness test

After the assembly of each refrigeration unit is completed, a series of tests are required to ensure the safe and stable operation of the unit, and there is an air tightness test. So, what should the refrigerator manufacturer pay attention to when doing the air tightness test?