Danfoss Compressor SZ175A9RQ

07/19/2020

Screw chiller-the operation process of refrigeration compressor!

Screw-type (ie twin-screw) refrigeration compressors have a pair of mutually meshing rotors with helical teeth in opposite directions. A rotor with a protruding tooth surface is called a male rotor, and a rotor with a concave tooth surface is called a female rotor. The teeth of the rotor are commensurate with the piston,

07/20/2020

From enclosure to seize share, half-sealed screw harvests markets above 40P

In the industry, many people think that the semi-closed piston is like a stable big brother.

09/07/2020

Do you know how the model designation of the air compressor comes from

Four basic marking methods 　　 1. Use motor horsepower to express: This was still feasible when the air compressor technology was not developed in the early days. However, with the continuous development of technology, even if the same motor is used now,

09/08/2020

Three requirements of modern industry for compressed air

In many chemical, food, ceramic, electronic industries and other industrial sectors that use compressed air energy, compressed air pollution can destroy other processes. Therefore, in order to improve the service life and reliability of pneumatic equipment and systems, and ensure the quality of the products produced, the compressed air must be purified and dried.

08/20/2020

What are the factors that affect the cooling capacity of the chiller

A normal running chiller will always encounter a series of small problems after working for a period of time. The following is a brief description of the problem that affects the cooling capacity of the chiller. The influencing factors are as follows:

08/17/2020

Structural requirements of modular air conditioning units

1. When the windward velocity of the cooling coil exceeds 2.5m/s, a water baffle shall be set. 　　2, the spray section should have an observation window, a water baffle and a water filter device.

06/14/2020

Broken refrigeration compressor bearings? What can be repaired? Which must be thrown?

Broken refrigeration compressor bearings? What can be repaired? Which must be thrown? How to judge whether the bearing can be used again and the defects of the bearing need to be replaced To determine whether the bearing can be used again, it should be 器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/07/2020

What is the difference between air-cooled heat pump units and water-cooled heat pump units

What is the difference between air-cooled heat pump units and water-cooled heat pump units Some people have never figured out what is the difference between air cooling and water cooling? The following compares the working principles,

09/07/2020

Reasons for rust or corrosion of gas tank

The gas storage tank is a part of the post-processing equipment of the air compressor, which mainly plays the role of gas storage, buffering, pressure reduction, and drainage. It will inevitably cause corrosion in the air, rain or humid atmosphere after long-term use or use for many years.