Danfoss Compressor SZ185A6PT

10/23/2023

Air Conditioner Line Frozen: Causes, Troubleshooting and Prevention Methods

When the air conditioner line freezes, it can be a frustrating experience for homeowners. Not only does it disrupt the cooling process, but it also indicates an underlying issue that needs to be addressed.

09/07/2020

The most complete air compressor energy saving transformation method

Due to the design standard of the air compressor, the user can only determine the motor capacity according to the maximum demand when selecting the model, resulting in a large margin in the air compressor system.

09/01/2022

What is a Magnetic Contactor?

In many cases, the magnetic contactor is simply referred to as a contactor. It is an electrical appliance that uses the current flowing through the coil to generate a magnetic field to close the contacts to control the load in industrial electricity.

06/29/2020

Compression ratio of American Copeland compressor

09/06/2020

Enterprise Guide-Purchase Air Compressor Pre-test

1. The feasibility of power saving transformation of air compressor The energy consumption of air compressors during use is obvious to all. The Zhongtian high-pressure fan power saver developed by okmarts.com based on the principle of frequency conversion can save electricity for all motor-driven air compressors. The overall power saving effect is remarkable, with a power saving rate of 20-50%.

09/07/2020

Commonly used energy saving points for air compressors

Air compressors are recognized as energy-intensive process equipment, and screw compressors are no exception. However, in the daily operation process, the energy consumption of screw compressors often does not attract enough attention from operating units. The main reason:

04/15/2025

How to Connect Rotary Encoder with Arduino Board UNO

Rotary encoder is an input device to help users interact with the system. It looks like a radio potentiometer, but it’s unique that it outputs a series of pulses.

08/04/2020

Full analysis of air conditioning automatic control system<br></br>

Which parts of the central air-conditioning system need to be equipped with automatic control?<br></br> Answer: It mainly includes two parts: the host part of the cold and heat source and the end equipment part, which need to be equipped with automatic control systems

09/01/2020

Analysis of heat recovery of oil-free air compressor

1.The working principle of oil-free air compressor cooling The air enters the first-stage low-pressure rotor pressurization and intercooler cooling through the filter, and then enters the second-stage high-pressure rotor pressurization and aftercooler

09/14/2020

What is the difference between oil and oil-free air compressors

The oil and non-oil in the air compressor generally refer to the oil content of the exhaust gas of the air compressor. Generally, the oil content of the oil machine is larger, and the oil content of the oil-free machine is 0.01ppm,