Danfoss Compressor SZ380A4RP

07/12/2022

How to Choose an Air Compressor

Choosing an air compressor can leave you feeling lost if you don't know what to look for. That's because air compressors power a wide range of tools over a wide range of applications.

08/21/2020

Common problems and solutions of industrial chillers summarized by the maintenance master

1. Water leakage (first determine the location of the water leakage) 　　 1. The pump leaks (causes: the shaft seal at the water pump is not well connected or the shaft seal has been damaged)

11/30/2021

Differences Between Sensor and Transmitter

Sensors and transmitters play an important role in the field of automatic control. Transmitters are developed based on sensors, which have close relationship and differences.

07/10/2024

Solenoid Valve Replacement: Detailed Steps, Precautions and Cleaning

The solenoid valve is a common control mechanism that uses electromagnetic force to control the flow of fluid. Generally composed of iron core, coil, valve cover, sealing gasket, etc.

08/15/2020

Selection knowledge of screw chiller

Screw chiller is a large-scale industrial refrigeration equipment. It is widely used in central air-conditioning and large-scale refrigeration industry. It plays an important role in refrigeration, cooling and cooling.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

07/14/2020

What are the reasons why the air conditioner is not cooling?

What are the reasons why the air conditioner is not cooling? In summer, people turn on the air conditioner mainly to get a cool feeling, but they did not find that the air conditioner has not been cold for a long time. The air conditioner is not cooling. What are the reasons why the air conditioner is not cooling? Many air conditioners are not cooling, because it is faulty Problem, so it is necessary to repair it, what are the ways to repair the air conditioner?

07/23/2020

Analysis of common failure causes of hermetic refrigeration compressors

1. How to identify the 3 terminals on the casing of a hermetic compressor?<br></br> The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.<br></br>

08/13/2020

Installation process and skills of cold storage board

1. According to the design drawings, if there are supporting beams, columns, and supporting steel frames in the library, they should be laid out and positioned according to the requirements of the design drawings, and accurately and clearly marked;

07/16/2020

Why should the high and low temperature test chamber be debugged and calibrated?

In order for the high and low temperature test chamber to exert its maximum efficiency and stability in the hands of customers, the most important thing is to debug and calibrate the factory during the 15-day forward behavior period. The following are the three methods for calibrating the high and low temperature test chamber and their The advantages and disadvantages of