Danfoss VFD Frequency Converter FC-360H2K2T4E20H2BX

09/14/2020

Application of synthetic compressor oil

At present, synthetic lubricants are widely used in the compressor field. Among them, oil-injected and oil-immersed rotary screw air compressors and large reciprocating compressors are one of the most used markets.

09/04/2020

How many do you know about the essential nine almighties in the bearing industry

1. Installation of bearing 　　 Whether the bearing is installed correctly or not affects the accuracy, life and performance. Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accordance with operating standards. The work standard items are usually as follows:

08/04/2020

Several important issues that should be paid attention to when installing and debugging the inverter on site

nverter is an electric energy control device that uses the on-off action of power semiconductor devices to transform industrial frequency power into another frequency.

08/08/2024

Everything You Need to Know about Car AC Compressor Control Valve

The car AC compressor control valve is a critical component in an automotive air conditioning system that plays a crucial role in regulating the operation of the AC compressor.

04/22/2025

The difference between chilled water, cooling water and condensed water and the principle of refrigeration

The central air-conditioning host is composed of a compressor, an evaporator, a condenser, and a throttle valve. The compressor provides energy. The condenser reduces the temperature of the refrigerant from the compressor.

04/15/2025

How to Connect Rotary Encoder with Arduino Board UNO

Rotary encoder is an input device to help users interact with the system. It looks like a radio potentiometer, but it’s unique that it outputs a series of pulses.

09/08/2020

The difference between air-cooled and water-cooled screw air compressors

The difference between air-cooled screw machine and water-cooled screw machine: 　　The oil cooler of the air-cooled screw compressor and the compressed air after-cooler are made into one body. It is an aluminum plate-fin structure and brazed in a vacuum furnace. Once the oil leaks, it is almost irreparable and only replaced. The working principle is that hot oil and high temperature (about 80℃) gas flow in their respective pipes,

07/25/2020

The 9 types of compressor failure and hazard analysis are all in it! ! !

Start with liquid is a problem that easily occurs during shutdown. In the shutdown state, the refrigerant will migrate from the system back to the compressor and be deposited in the lubricating oil.

07/11/2025

Speed-Torque Curve of Stepper Motors and FAQs

This is the torque the motor will produce when the motor is stationary and rated current is applied to the windings.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start