DEKEMA Vane Pump PV2R3-136-F-1-RUU-40

09/07/2020

Inverter 35 Q

1. What is an inverter? 　　Inverter is an electric energy control device that uses the on-off action of power semiconductor devices to transform industrial frequency power into another frequency.

06/04/2025

Appraisal and Test Method for Water Volume of FRP Cooling Tower

To control water resources, save scarce resources, and achieve full utilization of resources, FRP cooling towers have been widely used. It has corrosion resistance, high strength, light weight,

08/02/2022

Selection and Use of Hydraulic Motor

Hydraulic motor is a conversion element that converts the pressure energy of liquid into rotary motion machinery.

08/05/2020

What are the common faults of the cut-off foot of the chiller and the adjustment cabinet

1. The valve body of the valve of the chiller is mostly steel castings. Casting blisters may be formed during the production process, causing the valve to leak refrigerant during use.

07/27/2020

The refrigerator compressor keeps beeping after cleaning, but it is not cooling. What's the problem?

he compressor keeps ringing, so it keeps working. There is no intermittent start and stop sound, which means it has been working hard to refrigerate, but now there is no refrigeration output.

07/20/2020

What are the requirements for refrigeration compressor installation

What are the general requirements for refrigeration compressor installation? The editor will introduce it to you, and hope to help everyone! 1. Collect the original materials and technical documents of the refrigeration device and system design, and be familiar with all the contents.

06/29/2020

Compression ratio of American Copeland compressor

08/24/2020

The principle of dehumidification is very different from dehumidifiers and air conditioners

Spring and summer are always humid and humid seasons in the south, especially in the rainy season. The whole house feels moldy. In the north, house-type problems can easily cause some rooms to be humid.

07/16/2020

Vacuum leak test method for small cold storage equipment

Refrigeration systems with evaporating pressure gauges close to or below atmospheric pressure must be tested for vacuum leak tests, leaving the refrigeration equipment under proper vacuum for a certain period of time, reflecting and observing whether air has penetrated into the system from the reading of the vacuum pressure gauge for inspection The sealing performance of the cold storage equipment system.

06/20/2020

Application advantages and working process analysis of air energy heat pump

Air energy heat pump is to use the energy in the air to generate heat energy. It can provide 24 hours a day with large water volume, high water pressure and constant temperature to provide the family with different hot water, cooling and heating needs, and at the same time can meet the above requirements with the least energy consumption.<img src="{{media url=&quot;Application_advantages_and_working_process_analysis_of_air_energy_heat_pump.jpg&quot;}}" alt="" />