York screw and centrifugal compressor overhaul case and on-site repair and maintenance

York screw and centrifugal compressor overhaul case and on-site repair and maintenance York screw and centrifugal compressor overhaul cases and on-site repairs and maintenance. York screw compressor units are widely used in the chemical industry. Compressor units operate in oil and gas fields for long periods of time. They lack awareness of maintenance technology and preventive overhaul work is not in place Over time, the aging and wear of the compressor head bearings have caused serious wear on the internal cavity of the body, exhaust end and suction end. The grease of the drive motor is deteriorated, and the bearing is also aging and deformed, requiring overhaul work. York screw and centrifugal compressor overhaul cases and on-site repairs and maintenance, York screw compressor repair, technical engineers master the core technology of York refrigeration, meticulous in compressor maintenance, familiar with the coordination gap between various moving parts, Combined with the wear of the running parts, after a series of rigorous repairs and repairs, the compressor is more durable, efficient and stable. Inspection and repair of screw compressor body and slide valve, inspection and repair of female rotor and male rotor of screw compressor, inspection and repair of main bearing of screw refrigeration compressor, inspection of thrust bearing of screw refrigeration compressor, screw refrigeration compression Shaft seal inspection and repair, screw refrigeration compressor oil piston inspection, screw refrigeration compressor balance piston and balance piston sleeve inspection, screw refrigeration compressor lubrication system inspection and repair, screw refrigeration compressor inspection energy indicator assembly Inspection and repair. For each maintenance procedure, we will strictly inspect and process, analyze the fuse according to the damage of the compressor itself, so as to fundamentally solve the compressor unit failure and prevent the recurrence of old diseases. York screw and centrifugal compressor overhaul cases and on-site repairs and maintenance. The process rotor combined with high speed under high temperature and high pressure environment will inevitably cause deformation over time. At the same time, dust and impurities in the machine have accumulated for a long time. It may cause the Yin-Yang rotor to be deformed and the gap to increase. In severe cases, the host may be stuck. If the running time of the main engine exceeds the overhaul period, the bearing will be damaged. At this time, if the main engine is in an unsafe operating state, serious consequences may occur at any time. The maintenance of the compressor is very important. In terms of screw compressor disassembly and overhaul, the main steps are as follows: disassembly and overhaul, filling in the fault report to the customer, determining the fault, repairing each component, performing data measurement and dimensional inspection on each accessory, and strictly compressing the assembly according to the factory gap In the case of overhaul of the machine and the site, the test is correct and the machine is debugged. The compressor in the maintenance workshop is tested and sent to the site, and a professional is sent to debug. We have advanced technical means to ensure zero errors in maintenance! York screw and centrifugal compressor overhaul case and on-site repair and maintenance

Recent related posts

Customers frequently viewed