Delta Fan AFB0612HHB

06/29/2020

How the compressor works

12/30/2021

Car AC Compressor Troubleshooting-- Best Suggestions

Using a straight edge and a feeler gauge to examine the flatness error between cylinder head, cylinder block, crankcase and bottom cover, which should not be more than 0.05mm, otherwise, you should grind it.

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

08/16/2020

What is the difference between a water source heat pump and a water ring heat pump

1. Water source heat pump technology Water source heat pump technology is a low-temperature low-level thermal energy resource formed by using solar energy and geothermal energy absorbed from shallow water sources on the earth's surface

07/21/2020

How to protect the refrigeration compressor, you must master the following knowledge!

When the compressor is running, some abnormal conditions may occur, such as: exhaust pressure is too high, suction pressure is too low, oil pressure is insufficient, motor is overheated, excess liquid enters the cylinder, etc. In the event of an abnormal situation, the compressor will be damaged if there is no protective measure.

09/07/2020

What should be paid attention to when choosing an adsorption dryer

With the rapid development of China's industrial economy, compressed air has become the second safest energy source after electricity, which is called air source; as compressed air post-processing equipment, dryers have also developed rapidly.

06/21/2020

The role of condensing pressure regulating valve

Condensing pressure regulating valve 　　 When the refrigeration device is running, if the condensing pressure is high, the compressor discharge temperature will rise; the compression ratio will increase; the cooling capacity will decrease; The higher the condensing pressure, the greater the above adverse effects. The high condensation pressure is mainly seen in summer. <img src="{{media url=&quot;The_role_of_condensing_pressure_regulating_valve.jpg&quot;}}" alt="" />

08/24/2020

You never know why using air conditioners in summer can easily cause fires

Why summer is the season of high incidence of air conditioning fires? Why is it that the air conditioner is properly used, and it will spontaneously ignite after use? This is actually for a reason.

08/04/2020

The warranty period of the main cold storage equipment is too short, how to solve it

When it comes to three guarantees, no one knows or knows. According to the national "Three Guarantees Regulations", as one of the main electrical appliances supporting our lives, the whole refrigerator has a one-year warranty

01/15/2021

The reason why the refrigerator does not cool

[Introduction] The temperature of the refrigerator is low and it is mainly used to refrigerate food. It has a refrigerated box and a refrigerated freezer inside. Among them, there are one or more refrigerated boxes, and there is only one freezer. The temp器2䀀
ￜ皥
䖒皦즠Ʋ㉄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㉎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱